iniBuilds A300 Autopilot Panel for Stream Deck Plus
iniBuilds A300 Autopilot Profile
With the Flight Panels Autopilot Profile for the iniBuilds A300, you can control autopilot, communications, navigation, EFIS, transponder, internal lighting and more, all from the Stream Deck +’s physical buttons, LCD touchscreen and rotary dials.
Watch speed, heading, vertical speed, altitude and frequencies update in real time as you turn the dials, adding a new level of realism to your flight simulation experience.
For a comprehensive list of fe... iniBuilds A300 Autopilot Profile
With the Flight Panels Autopilot Profile for the iniBuilds A300, you can control autopilot, communications, navigation, EFIS, transponder, internal lighting and more, all from the Stream Deck +’s physical buttons, LCD touchscreen and rotary dials.
Watch speed, heading, vertical speed, altitude and frequencies update in real time as you turn the dials, adding a new level of realism to your flight simulation experience.
For a comprehensive list of features and functionality (which may vary between aircraft), please see below.
Flight Control Panel (FCP)
Button Controls: Autothrottle (A/THR), Altitude Hold (ALT HLD), Level Change (LVL CHG), Profile Mode (Profile), Heading Select (HDG SEL), NAV Mode (NAV), VOR/LOC Mode (V/L), Land Mode (LAND).
Rotary Dials & LCD Screen: Real-time values for speed, heading, altitude & vertical speed. Rotate the rotary dials left or right to increase or decrease values. Speed (SPD): Tap the screen to enable pre set and press the rotary dial to enable selected mode. Altitude (ALT): Tap the screen to change between 100/1000 increments and press the rotary dial for Altitude Pull. Heading (HDG): Tap the screen to change bank mode and press the rotary dial to enable heading selected mode. Vertical Speed (V/S): Press the rotary dial to enter V/S mode.
Radios & Communications
Button Controls: Autopilot 1 (AP1), Autopilot 2 (AP2), CWS/CMD. Rotary Dials & LCD Screen: Real-time frequency values for COM1/COM2 (Active and Standby). Rotate rotary dials 1 and 2 to change the standby frequency for COM1 and dials 3 & 4 for COM2. Tap the screen or press a standby rotary dial to swap between Standby and Active.
XPDNR/TCAS
Button Controls: Above/Below (ABV/BLW) (Long press for N), TCAS Range, ALT TCAS System (Long press to turn off), TCAS Test, IDENT, XPNDR Mode, & XPNDR SYS. Rotary Dials: Rotate the rotary dials to increase or decrease each of the transponder digits.
Navigation
Button Controls: ADF1 Transfer (ADF 1 TFR), ADF 1 Tone, ADF/ANT Mode. Rotary Dials & LCD Screen: Rotate rotary dials 1 and 2 to change the active ADF 1 frequency and rotary dials 3 & 4 to change the standby frequency. Press any rotary dial to change between active and standby.

