Tecnam P2010 180HP
Introducing the Tecnam P2010 by Aerosachs: Your Passport to Pure Aviation Thrills!
Elevate your flight simulation experience to unprecedented heights with the Tecnam P2010, a meticulously crafted payware aircraft add-on that redefines realism and excitement. Born in the heart of Italy's aviation excellence, the Tecnam P2010 is a masterpiece of engineering, blending advanced materials and cutting-edge design to deliver unparalleled performance and comfort.
Step into the cockpit of ... Introducing the Tecnam P2010 by Aerosachs: Your Passport to Pure Aviation Thrills!
Elevate your flight simulation experience to unprecedented heights with the Tecnam P2010, a meticulously crafted payware aircraft add-on that redefines realism and excitement. Born in the heart of Italy's aviation excellence, the Tecnam P2010 is a masterpiece of engineering, blending advanced materials and cutting-edge design to deliver unparalleled performance and comfort.
Step into the cockpit of this four-seat marvel and prepare to be captivated by its sleek lines and superior construction. Crafted from a blend of metal and carbon-fiber-reinforced polymer, every inch of the Tecnam P2010 exudes quality and precision. First unveiled to the world in April 2011, this aircraft has since become a symbol of innovation and sophistication in the aviation community.
Powered by the renowned Lycoming IO-360-M1A 180 HP engine, the Tecnam P2010 is more than just a plane – it's a testament to the pursuit of excellence in flight. Whether you're soaring through the skies or navigating challenging terrain, this aircraft is your ultimate companion, offering unmatched reliability and performance at every turn.
Developed by the expert team at Aerosachs in collaboration with erasam, our Tecnam P2010 for MSFS is a true labor of love, meticulously crafted using the latest data from the official Flight Manual (Doc. No. 2010/100, Ed. 2 Rev. 5, version 2018 October 22). Every detail, from the cockpit instruments to the exterior design, has been faithfully recreated to ensure an immersive and authentic experience like no other.
Prepare to embark on the flight of a lifetime with the Tecnam P2010 by Aerosachs. Whether you're a seasoned pilot or a virtual adventurer, this aircraft promises to take your simulation experience to soaring new heights. Get ready to experience the thrill of flight like never before – your journey begins now.
Version history:
Release 1. 4. 0
•smoothed and improved several 3D meshes (central pedestal, trim wheel, yokes, starter key, rudder pedals, 12Volt plug, switches casing, flap indicator lights, seats rails, etc. )
•updated some PBR textures
•improved decals quality (Fuel Selector, Starter key, Trim Wheel, etc. )
•added new animations (Left/Right air intake, 12Volt plug cover)
•added animation to show a static, non-interactive, VFR paper map (placed in the copilot bag) Note: map of the shown area can be updated manually replacing the PAPER_MAP. PNG. DSS file in the texture folder of the installed package
•completely redesigned breakers panel
•enabled Plug 12V breaker
•added breaker animation sound
•changed cockpit switches decal color to white, while keeping them green when emissive
•added random flight loading screens
Release 1. 3. 3:
-Digital Clock is not shown lighted when all switches are off
-MFD buttons are not shown lighted when all switches are off
-Added some wear and tear effects in the cabin
-Smoke system has been removed (as there are also a lot of more configurable alternatives)
-Throttle lever friction can be freely rotated
-Increased speed of responsiveness of controls (like yoke movement)
-Updated Pilot and Copilot view positions to better respect Asobo recommendations
-Added “EXT. POWER” CAS message on PFD
-Corrected “Alternate Air check” step in the Before Take Off section of the interactive checklist
-Alternate Air lever is now correctly impacting the engine manifold pressure
Release 1. 3. 2:
-Slightly reduced flap induced drag to increase takeoff/landing performance
-Changed cockpit lights type definition
-Changed emergency light type definition
-Replaced elevator trim gauge light effect
-Added Lean and System pages to G1000 engine page selection
-Documented in the handbook the LVARs used to control the aircraft behaviors
-Added several CAS messages (Fuel Pump On, Pitot Heat Off, Door Open) on PFD
-Tweaked engine parameters to improve performance
-Corrected left rolling effect when levelled
-Stall Warning breaker now also enables/disables stall warning beep
-Take off elevator trim setting now defaults to 0°
Release 1. 3. 1
-Cockpit texture is no more emissive in the dark
-Less shiny textures for rudder pedals
-Slightly reduced steering effect
-Corrected behavior of Stall Warning breaker to enable/disable “Stall” voice warning alert
-Added Minimum voice alert based on G1000 settings (when plane altitude above ground is at least 500 feet)
-Added SP5, GranLusso1, GranLusso2 and real aircraft C-FWSH livery variants (credits to jackzyg winner of the AeroSachs Tecnam P2010 180HP livery contest)
Release 1. 3
-QuickView Instrument 05 (Pedestal) has been redefined in order to be more effective during checklist execution
-Interactive checklist improved with new instruments highlighting and control steps
-Several cabin and fuselage improvements
-Added missing second exhaust pipe
-Added more cabin Internal PBR textures to PaintKit to allow easier customization
-Tuned interior textures settings for better roughness and emissive appearance
-Updated interior textures for SP1 (credits to jackzyg), Blue and Grey and SP4 (old New Paint renamed) liveries
-Improved external textures (credits to jackzyg)
-Full support of VR controllers (“VR controllers are not fully supported on this plane. ” warning message no more shown)
-Corrected AP Master switch behavior (now only enabling/disabling the AP)
-Corrected AP/Disc Trim yoke push button (now disabling the elevator trim and disengaging the AP while pressed)
-Corrected Trim Disc switch behavior (now enabling/disabling the elevator trim)
-Implemented external power management (linked to GPU visibility)
-Corrected central gear compression factor (now the aircraft can suffer shuddering under some conditions) and added compression animation
-Replaced MTV 12B/183-59 wood/composite 3-blade propeller with the MTV 15B/193-52 wood/composite 2-blade propeller
-Corrected G1000 reference speeds
-Tuned engine and flight dynamics parameters also enabling CFD flight
Release 1. 2
-Restored flap control handling lights
-Added new Left Back and Right Back quick views (associated to 45 degrees left and right views), replacing Pilot Door and Copilot Door quick views moved to Custom View category (to be used only for interactive checklist)
-Adjusted VR camera view zoom
-Slightly scaled the cockpit to better fit the cabin
-Added external LOD01 to improve performances when viewed from long distance
-Added Lycoming engine 3D model
-Added engine left and right cowling doors animation with a dedicated new EFB option
-Added opening of engine left and right cowling doors to external inspection checklist
-Added new Blue and Grey livery variant (credits to BigPapaSmurf)
-Corrected some breakers behavior and animation
-Tuned stall behavior and AOA lift efficiency parameters
-Corrected max CHT temperature
-Fixed missing elevator trim panel light
-Corrected Navigation Tail Light type (to avoid flash in the cockpit)
-Added Hour meter instrument
-Improved several cockpit textures with PBR materials
-Added Cabin Internal PBR textures to PaintKit to allow easier customization
- Release 1. 1. 0
The following fixes and enhancements have been added:
-Corrected emissive texture for G1000 PFD / MFD buttons
-Aligned ailerons and wings texturing for AeroSachs livery
-Corrected Panel Collision position (to avoid going through the cockpit using VR)
-Slightly increased scaling of some cockpit buttons and levers
-Enhanced propeller animation and added a dedicated blurred cone texture
-Slightly lowered cockpit side views
-Reduced steering sensitivity at ground
-Slightly increased breaks efficiency
-Corrected model setting to show pilot from external view
-Corrected propeller diameter as indicated in the POH for the 3-blade variable pitch (1830 mm / 6. 00 ft)
-Adjusted teardown left/right ground hook position
-Adjusted engine and flight dynamics parameters to better reflect real aircraft behavior
-Improved several cockpit textures with PBR materials
-Enhanced seats mesh
-G1000 defaulted automatically to the Working Title enhanced version
-Corrected visibility of sun visors from outside
-Added the first release of the livery paint kit to the package (available in the Paintkit folder)
Release 1. 0. 0
This is the first official release of the Tecnam P2010 180HP for MSFS made by erasam and published by AeroSachs
