simulación extrema
Filters
RORT Tarama Airport
SACO Cordoba Airport
NEW Airport develop in 4K
Cordoba is Argentina’s third-busiest airport, after Ministro Pistarini International Airport and Aeroparque Jorge Newbery, both of which are located in Buenos Aires.
The airport had been a jetport for a long time, having received commercial jet aircraft services before, but it had been lacking the size to receive larger numbers of passengers until Aeropuertos Argentina 2000, a private company that operates several airports in Argentina, decided to give in... NEW Airport develop in 4K
Cordoba is Argentina’s third-busiest airport, after Ministro Pistarini International Airport and Aeroparque Jorge Newbery, both of which are located in Buenos Aires.
The airport had been a jetport for a long time, having received commercial jet aircraft services before, but it had been lacking the size to receive larger numbers of passengers until Aeropuertos Argentina 2000, a private company that operates several airports in Argentina, decided to give internal Argentine airports more money so that they could expand and lure more airlines. Up until that moment, the Taravella airport, which was named after an architect, only had one story and one terminal.
The construction of a second and third floor began in 2000, designed by prominent local architect Mario Roberto Álvarez; by 2002, it was finished and Aerolíneas Argentinas decided to make the Taravella airport a hub for domestic flights.
The airport is equipped with the necessary lights to have night air traffic, but pilots flying there, especially pilots of light aircraft, are recommended to look out for birds, as there is quite a substantial number of them[clarification needed] inhabiting the areas nearby.
Today, Córdoba Airport primarily serves only domestic and regional destinations across deep South America. It does have flights to Central America and Europe also.
SARI Cataratas del Iguazú International Airport
New airport developed in PBR with high quality 4k textures.
This project is based on the new concession and designs for the new Cataratas del Iguazu Mayor D. Carlos Eduardo Krause International Airport (SARI). Located in the beautiful town of Puerto Igazu Argentina province of Misiones, Argentina, which facilitates access to the nearby Iguazu Falls. It has an area of 1804 hectares and is opreated by the company Aeropuertos Argentina 2000. It should be noted that this airport is in the pr... New airport developed in PBR with high quality 4k textures.
This project is based on the new concession and designs for the new Cataratas del Iguazu Mayor D. Carlos Eduardo Krause International Airport (SARI). Located in the beautiful town of Puerto Igazu Argentina province of Misiones, Argentina, which facilitates access to the nearby Iguazu Falls. It has an area of 1804 hectares and is opreated by the company Aeropuertos Argentina 2000. It should be noted that this airport is in the process of modernization.
The area where the airport is located is a 100% tourist area thanks to its strategic location that allows you to quickly reach the wonderful Iguazu Falls, which are visited by thousands of tourists throughout the year.
This development includes the hand modeling and terraforming of the Iguazu Falls, thus improving the appearance of the default terrain. The waterfalls have a basic animation of falling water that gives it a touch of more realism.
Features:
• Modeling of structures according to the new airport improvement plan
• High quality 4K textures with PBR
• Custom Jetway
• Custom floor textures and tracks
• Modeling of the interior of the control tower
SAVC Comodoro Rivadavia International Airport
New textured PBR development with 4K and 2K for MSFS2020 V1. 5. 0
Airport of the city Comodoro Rivadavia of the beautiful Patagonia Argentina.
Characteristics: External modeling of the new facilities, expansion and modernization of the airport.
High quality texturing in PBR with 2K and 4K resolution
All ground services available.
Custom jetways
Includes San Jorge Lighthouse
Departures hall interior modeling
General Enrique Mosconi Intern... New textured PBR development with 4K and 2K for MSFS2020 V1. 5. 0
Airport of the city Comodoro Rivadavia of the beautiful Patagonia Argentina.
Characteristics: External modeling of the new facilities, expansion and modernization of the airport.
High quality texturing in PBR with 2K and 4K resolution
All ground services available.
Custom jetways
Includes San Jorge Lighthouse
Departures hall interior modeling
General Enrique Mosconi International Airport (FAA: CRV - IATA: CRD - ICAO: SAVC), is an airport located in the Military-Airport District about 11 km north of the center of Comodoro Rivadavia, in the province of Chubut.
Due to its great movement, it is considered a hub airport in the Patagonian region, being one of the most active. 5 The airport acts as an Area Control Center (ACC) providing traffic control services for the southern air region (RASU), which has a center in Comodoro Rivadavia and that covers from the south of Viedma and Bariloche, including Antarctica.
It is the main hub (or connection center) of the LADE airline. In addition, the IX Air Brigade is located here.
It owes its name to Enrique Mosconi, who was an Argentine military man and civil engineer, known mainly for having been a pioneer in the organization of oil exploration and exploitation in Argentina, as well as the ideologue and first president of the state company Yacimientos Petroliferos Fiscales. .
The Army Aviation Section 9 of the Argentine Army is based at this airport. ",
Latest Update 26-02-2025:
Package compiled and updated with the latest MSFS2020 SDK
SAVE Esquel Airport
New airport developed in PBR with high qualitv 4k textures.
This project is based on the new concession and designs for the new Brigadier Gral. Antonio Parodi International Airport in the city of Esquel, which is in the process of modernization. Esquel is located in the province of Chubut in the heart of Argentine Patagonia, it is well known for its strong winds that even the most experienced pilots have respect for this sector. The area where the airport is located is a tourist area bot... New airport developed in PBR with high qualitv 4k textures.
This project is based on the new concession and designs for the new Brigadier Gral. Antonio Parodi International Airport in the city of Esquel, which is in the process of modernization. Esquel is located in the province of Chubut in the heart of Argentine Patagonia, it is well known for its strong winds that even the most experienced pilots have respect for this sector. The area where the airport is located is a tourist area both in summer and in cold winters where snow reclaims land and covers the entire province.
Features:
• Modeling of structures according to the new airport improvement plan
• High quality 4K textures with PBR
• Custom Jetway
• Custom floor textures and tracks
• Modeling of the interior of the terminal and the control tower
SAVT Trelew Airport
New airport developed in high quality PBR textures in 4K for MSFS2020
Almirante Marcos A. Zar Airport (FAA: TRE - IATA: REL - ICAO: SAVT) is an international and domestic airport, located 7 km north of the center of the city of Trelew, in the province of Chubut (Argentina).
The airport not only serves Trelew, but also Rawson and other cities in the lower Chubut River Valley. The air station also serves as a base for the Argentine Navy, which owns the property. In it, the Almirante... New airport developed in high quality PBR textures in 4K for MSFS2020
Almirante Marcos A. Zar Airport (FAA: TRE - IATA: REL - ICAO: SAVT) is an international and domestic airport, located 7 km north of the center of the city of Trelew, in the province of Chubut (Argentina).
The airport not only serves Trelew, but also Rawson and other cities in the lower Chubut River Valley. The air station also serves as a base for the Argentine Navy, which owns the property. In it, the Almirante Zar Naval Air Base is located. Its main destinations are Buenos Aires, Ushuaia, Comodoro Rivadavia and El Calafate.
It bears his name in homage to Vice Admiral Marcos Antonio Zar. The airport's passenger terminal is licensed to the London Supply company.
Characteristics of the stage:
Models of structures with high image resolution, achieving maximum realism in the external representation of each building and elements of the airport.
Textures in 4k in PBR mode.
Custom tile textures.
Custom Jetway
Ground services available.
Platforms in Aeronaval Almirante Zar availiables
Enjoy your flights through the beautiful Patagonia Argentina!
SAVY Puerto Madryn Airport
SAWC El Calafate International Airport
New airport of Bella Patagonia Argentina.
"El Calafate International Airport" SAWC. This development is the external representation of the airport, trying to be as close to the real thing as possible.
- All land services available.
- It has the open hangar of the "Aeroclub Lago Argentino".
- New gateway recently installed.
General information:
El Calafate "Comandante Armando Tola" International Airport, (IATA: FTE - ICAO: SAWC - FAA: ECA) is an airport serving ... New airport of Bella Patagonia Argentina.
"El Calafate International Airport" SAWC. This development is the external representation of the airport, trying to be as close to the real thing as possible.
- All land services available.
- It has the open hangar of the "Aeroclub Lago Argentino".
- New gateway recently installed.
General information:
El Calafate "Comandante Armando Tola" International Airport, (IATA: FTE - ICAO: SAWC - FAA: ECA) is an airport serving the city of El Calafate, in the province of Santa Cruz, Argentina. The airport is located 23 km from the city center.
It has a single track of 2,550 x 45 m and a terminus of 2,800 m². The airport was built by the Government of the Province of Santa Cruz in two stages:
Runway, Platform, Taxiway and Access Road: through the General Administration of Provincial Highways (AGVP), public tender awarded to the companies Esuco SA - Decavial SA UTE, start date: October 1997. Completion date: May 1999. Construction Inspector for AGVP: Ing. Alejandro Sofía, Technical Representative and Construction Manager: Ing. Mauro Guatti.
Terminal Building: a year later, through a public works concession from the Government of the Province of Santa Cruz, the construction and operation of the Terminal Building and Infrastructure was awarded to the London Supply Company, who appointed Mario Feldman as general director of works ( 1941-2003). It was inaugurated in November 2000. It was built to replace the Lago Argentino Airport. This airport has undergone a significant expansion carried out in 2014. This has increased the operational capacity and the concurrence factor. In 2016 it received about 12 daily flights and together with the new SAMIC Hospital in El Calafate inaugurated in 2015, the airport has improved its category.
The terminal was designed by Carlos Ott, a Canadian nationalized Uruguayan architect, who was also responsible for the passenger terminal at the International Airport of Ushuaia and Punta del Este - Uruguay. For this reason, the terminals have similar characteristics: a rich stone design and cantilevered roof plans, appropriate to the climatic characteristics of the area.
El Calafate International Airport is an important means of access for tourists visiting Los Glaciares National Park.
SAWE Rio Grande Airport
New development in 4K with PBR textures for MSFS2020
The Gob International Airport. Ramón Trejo Noel (FAA: RGA - IATA: RGA - ICAO: SAWE), is an airport that is located about 5 km northwest of the center of the city of Río Grande, in the Province of Tierra del Fuego, Antarctica and South Atlantic Islands (Argentina). The airport is home to the Rio Grande Naval Air Station of the Argentine Navy.
This development is the closest possible external representation to the SAWE Rio Grande ... New development in 4K with PBR textures for MSFS2020
The Gob International Airport. Ramón Trejo Noel (FAA: RGA - IATA: RGA - ICAO: SAWE), is an airport that is located about 5 km northwest of the center of the city of Río Grande, in the Province of Tierra del Fuego, Antarctica and South Atlantic Islands (Argentina). The airport is home to the Rio Grande Naval Air Station of the Argentine Navy.
This development is the closest possible external representation to the SAWE Rio Grande Airport located in Patagonia Argentina. It has a personalized Jetway and taxiparking in the civil and military area.
All ground services enabled.
Update 2. 0 Fix Runways
SAWG Rio Gallegos International Airport
New airport in Bella patagonia Argentina
This development is the external representation of the Norberto Fernadez International Airport of Rio Gallegos.
The airport has 5 parking lots, 3 remote and 2 gates with sleeves.
All ground services available.
Piloto Civil Norberto Fernández International Airport (FAA: RGL - IATA: RGL - ICAO: SAWG), is an airport located about 8 km northwest of the center of Río Gallegos, in the province of Santa Cruz.
The airport is the bas... New airport in Bella patagonia Argentina
This development is the external representation of the Norberto Fernadez International Airport of Rio Gallegos.
The airport has 5 parking lots, 3 remote and 2 gates with sleeves.
All ground services available.
Piloto Civil Norberto Fernández International Airport (FAA: RGL - IATA: RGL - ICAO: SAWG), is an airport located about 8 km northwest of the center of Río Gallegos, in the province of Santa Cruz.
The airport is the base for air operations to Antarctica. It was also a mandatory stopover for the "Jumbos" of Aerolineas Argentinas, who made the transpolar flight from Buenos Aires to New Zealand and Australia. 3 4
The Aviation Section of the XI Army of the XI Mechanized Brigade of the Argentine Army and the Río Gallegos Military Air Base of the Argentine Air Force are located at this airport.
Note: The C-130 aircraft is a static ornament item.
This version is compatible only with the ORIGINAL versions of Microsoft Flight Simulator 2020, there will be no support for pirated versions.
Please choose the correct path for your "Community" folder if you have the simulator installed on another hard drive other than drive C: you must manually enter the new Community path to avoid conflicts.
Latest Update 24-03-2025:
Package compiled and updated with the latest MSFS2020 SDK