Results for:
Found: 226
Filters
FS Fire
Realistic fire simulation and aerial firefighting for Microsoft Flight Simulator. Fight live satellite-tracked fires - solo or with friends. 325 missions, single player or multiplayer enabled.
AERIAL FIREFIGHTING IN FREE FLIGHT MODE!
Panel demo, videos, and more info @ FSFire. net
-NEW: Wind-driven fire lines that spread, bow, and throw spot fires
-NEW: Retardant that paints the ground and acts as a firebreak
-NEW: Reported fire incident feed - US, Canada, and Europe
-... Realistic fire simulation and aerial firefighting for Microsoft Flight Simulator. Fight live satellite-tracked fires - solo or with friends. 325 missions, single player or multiplayer enabled.
AERIAL FIREFIGHTING IN FREE FLIGHT MODE!
Panel demo, videos, and more info @ FSFire. net
-NEW: Wind-driven fire lines that spread, bow, and throw spot fires
-NEW: Retardant that paints the ground and acts as a firebreak
-NEW: Reported fire incident feed - US, Canada, and Europe
-NEW: Rebuilt fire and smoke effects with a performance/quality slider
-Multiplayer support
-Live Fires: Global coverage
-Spawn your own fires
-Works with any aircraft
-Mission mode with 325 missions
*******************************
Fire Lines: Draw a line of fire across the map and watch it behave like a real fire front. It drifts downwind, bows outward as its center outruns its flanks, throws embers that start spot fires ahead of it, and leaves scorched ground behind. Burn marks persist from 5 minutes to 4 hours. Fully multiplayer synchronized.
*******************************
Retardant as a Tool: Red retardant paints the ground where it lands and acts as a genuine firebreak. A drifting fire line stops when it reaches a stain, so laying line ahead of the fire is a real tactic. Set persistence in minutes or leave it unlimited. Multiplayer compatible.
*******************************
Total Fire Control: FS Fire pulls real active fire data from three VIIRS satellites at 375m resolution, refreshed every 30 minutes by a cloud backend. Fire radiative power is mapped to fire size, so a major California blaze spawns differently than a small brush fire. Spawn custom fires anywhere by map-click or coordinates, with fixed or randomized sizes, and enable wind-driven spread.
*******************************
Reported Fire Incident Feed: A map layer of real wildfires reported by the agencies fighting them - NIFC/WFIGS for the US, CWFIF/Natural Resources Canada, and satellite-detected activity across Europe. Click a marker for name, size, containment and cause, then fly out and work it.
*******************************
Physics-Based Drop System: Drop calculations factor altitude AGL, ground speed and heading to place water or retardant where physics says it should land. Elliptical splash zones grow with altitude and airspeed. Choose unlimited drops or set how many a full tank gives. Arm a GPS drop by clicking the map - the trigger zone is drawn to scale.
*******************************
Helicopter Bucket: Spawn a suspended bucket under any helicopter, with scooping over any water. Position it fore/aft, left/right and up/down to match your airframe, and tune how freely it swings with pitch, roll and yaw.
*******************************
Full Multiplayer Support: Host a session and fly with others across VATSIM, IVAO or native MSFS multiplayer. Fires, fire lines, retardant, props and drop effects all sync in real time. Guests join with an 8-digit code.
*******************************
Mission System: 325 handcrafted missions at real-world POIs globally - fires, vehicle incidents, boat emergencies, and structure fires. Each logs drop efficiency and awards Gold, Silver or Bronze. Daily Challenges double points, Weekly Goals track progress, and a logbook stores your best result per mission.
*******************************
Simobject Scene Builder: Browse hundreds of MSFS simobjects - aircraft, vehicles, boats, animals, humans, landmarks. Place by map-click or coordinate, rotate, drag and set them in motion along a path. Save and load whole scenes, now including fire lines.
*******************************
Make It Yours: Sliders for flame brightness, flame tint, and smoke color. Fire sound effects and thermal turbulence over large fires. Panel settings save per aircraft automatically.
English, Italian, German, French, Spanish, & Portuguese panel translations
Perth Landmarks
Experience Perth with the detail it deserves in Microsoft Flight Simulator.
From the banks of the Swan River to the heart of the CBD, Perth Landmarks brings Western Australia’s capital to life with a highly detailed, carefully built scenery package designed for both Microsoft Flight Simulator 2020 and Microsoft Flight Simulator 2024.
This is Perth made for simmers who want more than a quick flyover. It is built for low and slow VFR flying, helicopter operations, city exploring, scenic ro... Experience Perth with the detail it deserves in Microsoft Flight Simulator.
From the banks of the Swan River to the heart of the CBD, Perth Landmarks brings Western Australia’s capital to life with a highly detailed, carefully built scenery package designed for both Microsoft Flight Simulator 2020 and Microsoft Flight Simulator 2024.
This is Perth made for simmers who want more than a quick flyover. It is built for low and slow VFR flying, helicopter operations, city exploring, scenic routes, screenshots, and those flights where you simply want the world below you to feel more complete.
With a huge collection of hand-crafted points of interest, thousands of carefully placed models, enhanced waterfront areas, improved night lighting, detailed landmarks, vessels, animated features and custom locations to discover, Perth Landmarks adds the depth and atmosphere needed to make the city feel alive in your simulator.
A more complete Perth experience Perth Landmarks has been created to make the city more recognisable, more detailed and more enjoyable to explore from the air. Key areas across Perth have been enhanced with custom modelling and hand-placed detail, helping to better capture the real-world character of the city. From the CBD and Elizabeth Quay to Fremantle, Matagarup Bridge, Royal Perth Hospital, Langley Park and the surrounding marine areas, this package gives pilots more to see, more to use and more reasons to keep coming back.
Whether you are flying along the river, arriving into the city, exploring by helicopter, or setting up the perfect screenshot, Perth now feels like a proper destination. Built for day, night and everything in between Perth is stunning from the air, and this package has been designed to make that experience even better at any time of day. By day, the city is filled with more recognisable landmarks, hand-placed scenery and detailed waterfront areas. By night, enhanced lighting, animated features and illuminated landmarks bring a completely different atmosphere to the city.
Elizabeth Quay has received particular attention, with detailed scenery, animated lighting, billboards and selected MSFS 2024 walk mode support, giving you another way to experience one of Perth’s most iconic areas. More than just landmarks Perth Landmarks is built to add meaningful places to fly around, land at and explore. A highly detailed Royal Perth Hospital model is included, complete with a landable helipad, making it a great addition for helicopter pilots and emergency-service style operations. The Fremantle Docks area has also been enhanced with custom port detail, improved marine areas and vessels, and the AVWest Heliport Hangar has been included with time-controlled animation, opening at 8:00 AM and closing at 6:00 PM local simulator time.
You’ll also find a detailed Matagarup Bridge with animated lighting, improved waterfront scenery, and the included Langley Park Airstrip, giving you even more ways to enjoy Perth from the cockpit. Compatible with World Update Australia Perth Landmarks is compatible with the Microsoft Flight Simulator World Update Australia content. To get the intended experience, you will need to use the simulator’s Package Re-order Tool and ensure the Australian POIs package is placed above Perth Landmarks in the package order list. This allows the scenery to work correctly alongside the World Update Australia content while still giving you the enhanced Perth experience included with this package. A special tribute Included within the scenery is a memorial under the big Australian flag for our good friend Milo Taylor. It is a small but meaningful inclusion and something we are incredibly proud to have as part of Perth Landmarks.
Your next Australian city to explore Perth Landmarks gives Western Australia’s capital the presence it deserves in Microsoft Flight Simulator. It adds the landmarks you expect, the extra detail you notice, and the atmosphere that makes a city worth exploring again and again. From river runs and city circuits to helicopter work, night flights and scenic sightseeing, this package turns Perth into a proper destination in your simulator. Add Perth Landmarks to your collection and discover a more detailed, more immersive Perth from the skies.
0CN2 - Sutter Butte Dusters Airport
Step into the world of agricultural aviation at Sutter Butte Dusters (0CN2)—a purpose-built strip set deep in the farmlands of Northern California. This isn’t your typical airport. It’s a place where precision flying meets a landscape that’s as functional as it is beautiful.
Surrounded by miles of cultivated fields, this airstrip puts you to work the moment you lift off. Tight patterns, low passes, and constant repositioning define the experience—but it all unfolds within one of the most vis... Step into the world of agricultural aviation at Sutter Butte Dusters (0CN2)—a purpose-built strip set deep in the farmlands of Northern California. This isn’t your typical airport. It’s a place where precision flying meets a landscape that’s as functional as it is beautiful.
Surrounded by miles of cultivated fields, this airstrip puts you to work the moment you lift off. Tight patterns, low passes, and constant repositioning define the experience—but it all unfolds within one of the most visually distinct regions in the state.
Set near the base of the Sutter Buttes—often called the smallest mountain range in the world—the area offers a natural backdrop that’s impossible to miss. The Buttes give shape to the horizon, adding depth and identity to every approach without taking away from the job at hand.
Backwood Studios brings this environment to life with immersive detail, animated elements, and a fully explorable world that extends well beyond the runway—creating a space where work and landscape come together naturally.
Features
Immersive Airfield
- Accurate recreation of Sutter Butte Dusters (0CN2)
- Narrow asphalt runway designed for short-field operations
- True-to-life layout in an active farming region
Detail
- Custom-built, real-world structures
- Detailed farmland environment
- Natural integration with the surrounding Sutter Buttes region
Animation & Life
- Animated hangars
- Animated props throughout the airfield
- A living, working airstrip atmosphere
Explore Beyond the Runway
- Many miles of custom drivable roads
- Fully explorable surrounding area
Built for the Working Pilot
- Designed specifically for agricultural aviation
- Ideal for low-level flying, crop dusting, and precision operations
Stratoware Kitfox Speedster
Introducing, the Kitfox Speedster Series 7 for Microsoft Flight Simulator 2020 by Stratoware, developed by Adi S.
The Kitfox Speedster Series 7 by Denny Kitfox is a single engine, 2 seater, amateur built kit plane. The speedster variant of the Kitfox Series 7 line up is much like the Speedster Series 4, but with shorter wings and a faster roll rate compared to other Kitfox aircraft, to increase speed and roll rate. The Kitfox brand has a reputation for making high performance aircraft, c... Introducing, the Kitfox Speedster Series 7 for Microsoft Flight Simulator 2020 by Stratoware, developed by Adi S.
The Kitfox Speedster Series 7 by Denny Kitfox is a single engine, 2 seater, amateur built kit plane. The speedster variant of the Kitfox Series 7 line up is much like the Speedster Series 4, but with shorter wings and a faster roll rate compared to other Kitfox aircraft, to increase speed and roll rate. The Kitfox brand has a reputation for making high performance aircraft, capable of extremely short landings and takeoffs, which is excellent for bush flying. Kitfox offers a series of engines to be implemented into their aircraft, all made by the Austrian company Rotax. This addon features the Rotax 912 iS, a four-stroke piston engine, with the capability of producing up to 100 horsepower. This engine is paired with an Airmaster Propeller. These propellers come with a controller system, to change the angle of the blade. This controller has been implemented in this addon.
MI-2 Hoplite On Sale
The Mi-2 helicopter is an outstanding example of Soviet design. Produced in Poland in a variety of modifications, it found popularity in many countries due to its multifunctionality and unique style. This meticulously built study-level model is the result of countless hours of research and development by multi-talented team of professionals.
PRODUCT FEATURES
- Top model accuracy based on laser scanning and photogrammetry giving unprecedented visual similarity with real model
- A fu... The Mi-2 helicopter is an outstanding example of Soviet design. Produced in Poland in a variety of modifications, it found popularity in many countries due to its multifunctionality and unique style. This meticulously built study-level model is the result of countless hours of research and development by multi-talented team of professionals.
PRODUCT FEATURES
- Top model accuracy based on laser scanning and photogrammetry giving unprecedented visual similarity with real model
- A fully clickable cockpit with click-and-hold interactive simulation
- Unmatched precision of avionics and systems providing an unforgettable study-level experience
- User manual developed in accordance with the official documentation and including detailed descriptions of flight procedures and real-life checklists
- Authentic flight model implemented in accordance with official Flight Manual as well as feedback from expert simmers and real-life Mi-2 pilots
- Immersive animations and visual effects including night lighting, signal rockets and aerobatic smokes
- Atmospheric sounds recorded from a real Mi-2 helicopter capturing the full range of audio effects, including distance effects based on the user’s position
- Solid performance on any hardware type maintaining a FPS comparable to default aircraft at standard airport, often exceeding 60 frames per second
- Full VR compatibility with exclusive ability to use only VR controllers to make the flight even more immersive
- Future model upgrade and diligent customer support
CUSTOM FEATURES THAT REPEAT ACTUAL REAL-LIFE HELICOPTER BEHAVIOR
1. Helicopter systems
- Electrical system that accounts for all loads of DC and AC consumers, current, resistance and voltage; load on the batteries, their discharge and charging; realistic behavior of generators when distributing load between them; realistic behavior of converters and their consumers
- Pneumatic system maintains a constant air pressure in the brake system using a compressor installed on the engine, has an air flow rate and is necessary for the operation of the helicopter brake system
- Fuel system accounts for fuel consumption at different engine modes; fuel quantity indicator accounts for the position of the helicopter in space (roll, pitch) repeating the position of fuel in the tank
- Hydraulic system accounts for pressure, temperature, the amount of hydraulic fluid depending on loads and the state of the atmosphere
- Oil system accounts for pressure, temperature, the amount of oil, depending on the operating modes of the engines and the state of the atmosphere
- Fire extinguishing system, including system monitoring and control
- Heating and anti-icing systems allow to monitor the condition of the icing of the helicopter and control the heating of the blades and windows of the helicopter depending on the state of the environment
- Lighting equipment depends on the state of the helicopter electrical system
2. Helicopter control
- The interaction of the helicopter control knobs fully corresponds to the actual position of the blade angle in different flight modes
- Trimming system allows you to balance the helicopter in a stable position
3. Engines control
- Implementation of motor control, including separate control
- Engine starting system accounts for the load on the electrical system at the time of starting, the state of the atmosphere and the state of the liquids required for the operation of the engines
- Kinematics of combined control unit of engines RPM and propeller pitch that allows to perform all checks, including engines run-up in accordance with the manual
4. Instruments
- Aviation clock with second meter repeats the actual behavior of the watch, including all operating modes
- Gyrohorizons have realistic behavior of gyromechanism, including its spin-up and shutdown
- Anaeroid tubes allows realistic behavior of instruments that use them, including the influence of incoming flow and atmospheric pressure
- Devices operating from electric current account for inertia and friction force of needle indicators
- Radio altimeter accounts for slaving and adjustment
- Rotor pitch indicator with realistic behavior during power loss
- Airspeed indicator with response to wind, airflow and direction effects implemented
5. Interactive cockpit controls
- The mechanical and kinematic behavior of cockpit controls were modeled right up to simulating the operation of the toggle switch spring
- Switches respond to mouse wheel input
6. Navigation
- ADF allows to navigate by beacons and indicates the magnetic course of the helicopter; this system also implements a simulation of the gyro-magnetic compass operation with a simulation of real slaving
7. Radio
- Radio unit allows radio communication with ATC at the selected frequency
- Intercom allows to select various listening modes, including ADF signals
8. Physics and effects
- Atmospheric precipitation realistically displayed on the surface of the windows of the helicopter along with the effect of icing on windows
- Firing signal rockets and smoke generator realized
- Flight model accounts for realistic location of the center of gravity, as well as its influence on the control of the helicopter
- Switching from asymmetric to straight airflow and vice versa causes natural vibration
- Natural deflection of the blades as reaction to the wind in an idle state, the cone of rotating blades changes its size depending on the load on the main rotor
9. Doors
- Cabin doors fully implemented with individual mechanics for each door
- Interactive opening by dragging the handle with inertia response
- React to helicopter flight dynamics: pitch, acceleration/deceleration, roll, yaw
- Doors may partially open or close in flight if not properly secured
GAMEPLAY INSTRUCTIONS
- VHF allows you to adjust ATC frequencies in multiples of 0. 25
- Manipulators: combine two modes of interaction:
- mouse wheel - instantaneous state switching
- left mouse button + movement - realistic state switching
- VR - fully adapted, including control of the longitudinal and transverse control knob by moving the controller
- The model includes the ability to automatically start and turn off the helicopter with the preparation of systems in the correct sequence through simulator commands
- To facilitate control, some controls are connected to simulator commands (see manual list)
- When controlling the watch, it is necessary to familiarize yourself with the instructions, since due to the complexity of the implementation, combined control of the manipulators was used
- Due to the realistic implementation of the electrical system and the load on the batteries at the time of starting, the battery charge is enough for 5-6 unsuccessful starts. Due to the fact that it is not possible to replace the battery, the model must be restarted to reset the state of the batteries
- The altimeter has realistic control of the pressure setting handle, which has a reverse direction of rotation (rotation to the right reduces the barometric height, while rotation to the left increases it)
- To remove the helicopter from the parking brake, press the latch on the helicopter control stick or use the simulator command
- The nose steering wheel is made in accordance with a realistic model, and is free castoring (not directly related to the position of the pedals)
- Due to the realism of helicopter centering, restrictions on helicopter centering and loading should be complied with
- For correct display of the helicopter heading on the UGR-4UK device in 3. 5 min after starting the helicopter and starting all systems, it is necessary to slave the heading system by pressing the «СОГЛАСОВАНО» button
- For toggle switches with more than 3 positions, to move the toggle switch in the required direction, use manipulator located in the direction of toggle switch movement (wiper toggle switch, АКК/ГЕНЕРАТОР toggle switch)
- Due to the custom implementation of all systems, we do not recommend using default simulator failures
- Audio and Immersion
- Wwise fully dynamic sound pack
- Sound of engines, systems and other controls
HMS Queen Elizabeth Carrier CATOBAR Conversion - Project Ark Royal
This add-on recreates the HMS Queen Elizabeth aircraft carrier with a proposed CATOBAR (catapult and arrestor gear) upgrade, featuring a high-quality model, animated deck crew, and detailed bridge interiors. It includes catapults, arrestor wires, interactive elevators, ILS-supported approaches, and a living deck with various animations. Carrier functionality is managed through the separate ANSMedia Toolbar. The demo provides multiple static locations, while additional features and locations are ... This add-on recreates the HMS Queen Elizabeth aircraft carrier with a proposed CATOBAR (catapult and arrestor gear) upgrade, featuring a high-quality model, animated deck crew, and detailed bridge interiors. It includes catapults, arrestor wires, interactive elevators, ILS-supported approaches, and a living deck with various animations. Carrier functionality is managed through the separate ANSMedia Toolbar. The demo provides multiple static locations, while additional features and locations are available in the paid version.
Ciudad_de_catamayo_v3
catamayo_City_2023 Version 2. 2. 0 EcuaVirtual3D The Ciudad de Catamayo Airport (IATA: LOH, ICAO: SECA) is an airport located in the canton of Catamayo, Province of Loja, Ecuador. The city of Catamayo, where the airport is located, is located 30 kilometers from Loja, approximately 30 minutes by land from the provincial capital.
The Catamayo airport was built during the regime of President Camilo Ponce Enríquez (1956-1960) and was originally called Camilo Ponce Enríquez Airport. A faithful re... catamayo_City_2023 Version 2. 2. 0 EcuaVirtual3D The Ciudad de Catamayo Airport (IATA: LOH, ICAO: SECA) is an airport located in the canton of Catamayo, Province of Loja, Ecuador. The city of Catamayo, where the airport is located, is located 30 kilometers from Loja, approximately 30 minutes by land from the provincial capital.
The Catamayo airport was built during the regime of President Camilo Ponce Enríquez (1956-1960) and was originally called Camilo Ponce Enríquez Airport. A faithful replica of the Ciudad_de_catamayo_2023 AIRPORT.
- Accurate modeling, based on original references, plans and other studies.
- Fully customized flooring, with ambient occlusion included in the textures.
- Custom taxiway sign.
- Static objects, vehicles and aircraft are present in the scene.
- Avenues and streets with circulation of standard and customized vehicles.
- HDR lighting with custom night textures.
- Custom textures with ambient occlusion.
- Custom Approach Lighting Systems (ALS).
- Taxi routes included for aircraft, “taxi route”.
- New Control Tower with rendering of the interior.
- Very accurate mesh of fully edited terrain in the airport area.
- gsx-compatible.
- compatible with ambitiouspilots-toolbar-pushback package included
- Camilo Ponce Enríquez AIRPORT Instruction Manuals.
The distribution of this package in whole or in part, for profit to third parties, is prohibited.
Property of ECUAVIRTUAL3D.
IF YOU HAVE QUESTIONS, PROBLEMS, CRITICS OR SUGGESTIONS, PLEASE CONTACT US BY EMAIL AND WE WILL BE IN TOUCH. Intriago181281@gmail. com
FACILITY:
The installation of my product will work through the simInstaller application.
Enjoy
COPYRIGHT © 2023 ECUAVIRTUAL3D
ms2020
Airport World V4.2.0 On Sale
AIRPORT WORLD - The Ultimate Airport Expansion ✈️
???? DISCOVER 1913 HIDDEN AIRPORTS!
Tired of flying to the same airports? Missing those small regional airstrips, remote bush strips, and hidden gems that make exploration exciting? Airport World fills the gaps in your simulator with 1,913 meticulously crafted airports from around the globe!
???? ONE PURCHASE - BOTH SIMULATORS!
No double-dipping! Your single purchase includes optimized versions for:
- ✅ Microsof... AIRPORT WORLD - The Ultimate Airport Expansion ✈️
???? DISCOVER 1913 HIDDEN AIRPORTS!
Tired of flying to the same airports? Missing those small regional airstrips, remote bush strips, and hidden gems that make exploration exciting? Airport World fills the gaps in your simulator with 1,913 meticulously crafted airports from around the globe!
???? ONE PURCHASE - BOTH SIMULATORS!
No double-dipping! Your single purchase includes optimized versions for:
- ✅ Microsoft Flight Simulator 2024
- ✅ Microsoft Flight Simulator 2020
Why buy twice when you can fly everywhere with one purchase?
???? WHAT MAKES AIRPORT WORLD UNIQUE?
???? QUADRUPLE YOUR LANDING OPTIONS
- +1,913 airports added to your simulator
- Small regional fields, bush strips, private airstrips
- Remote locations you've never seen before
- Perfect for GA pilots and exploration lovers
???? TRUE GLOBAL COVERAGE
From the Arctic ice strips to tropical island hideaways, from African bush strips to mountainous South American fields - we've got the world covered!
????️ PERFECT FOR:
- Bush flying enthusiasts
- GA and private pilots
- Airline pilots exploring new routes
- Virtual explorers tired of the same old airports
- Anyone who loves discovering hidden aviation gems
???? TECHNICAL EXCELLENCE
PRECISE DATA
Every airport features:
- Real-world coordinates and elevations
- Accurate runway layouts and surfaces
- Proper lighting and markings
- Optimized performance - no FPS impact!
SEAMLESS INTEGRATION
- No conflicts with default airports
- Works with all aircraft - from Cessnas to 747s
- Compatible with most popular addons and mods
???? COMPLETE SUPPORT ECOSYSTEM
Included FREE: Access to our exclusive Airport World web portal featuring:
- Interactive world map of all airports
- Advanced search by country, region, or airport type
- Detailed airport information and charts
- Code mapping between MSFS 2024 and 2020 versions
- Regular updates and new airport additions
???? PERFECT FOR THESE SCENARIOS:
???? "I want to fly somewhere nobody else goes!"
→ Discover hundreds of unique, rarely-visited airports
???? "I'm tired of the same old flight paths!"
→ Open up thousands of new route possibilities
???? "I love bush flying and remote strips!"
→ We've added the best bush and mountain strips worldwide
???? "I want to explore my local area in detail!"
→ Find small airports near you that were missing
???? WHAT YOU GET
Your Instant Download Includes:
- ???? MSFS 2024 Version (Full feature set)
- ???? MSFS 2020 Version (Optimized for compatibility)
- ????️ Web Portal Access (Lifetime membership)
- ???? Complete Documentation
- ???? Free Future Updates
❓ FREQUENTLY ASKED QUESTIONS
Q: Will this affect my performance?
A: No impact on FPS! Our airports are optimized for smooth performance.
Q: Are these real airports?
A: Yes! Every airport is based on real-world data and charts.
Q: What if I own both MSFS 2020 and 2024?
A: You're covered! Install both versions simultaneously with one purchase.
Q: How do I find these airports in-game?
A: Use our web portal or simply search by ICAO codes in the simulator.
⭐ WHY PILOTS LOVE AIRPORT WORLD
"Finally, all those small strips I've been wanting to fly to are there! Game changer for bush flying!" - Mark T. , Real World Pilot
"The web portal alone is worth it. Being able to plan trips with all these new airports is incredible. " - Sarah L. , Virtual Airline Captain
"I bought both sim versions separately from another developer. Wish I'd found this first - amazing value!" - James R. , Simulation Enthusiast
???? SPECIAL LAUNCH OFFER
Why wait? For less than the cost of a single airport from other developers, you get 1,913 airports plus two simulator versions plus lifetime web access!
???? READY TO EXPLORE?
Click [ADD TO CART] now and transform your flight simulation experience!
Your next adventure is waiting. . . and it lands at an airport nobody else knows about! ✈️
*System Requirements: MSFS 2020 (v1. 39. 9+) or MSFS 2024 • Internet access recommended for web portal • 500MB storage space*
CanuckAir Simulations - Bringing the World's Airports to Your Simulator ????
*** V4. 2. 0 has several updated airport runway placement, start positions and textures. There is now a secure self installer, and no longer needing to have to edit community folder when we update the installer takes care of this ***
Bratislava Cityscape
Bratislava, is the capital and largest city of Slovakia and the fourth largest of all cities on the river Danube. Officially, the population of the city proper is about 479,000; however, the wider Bratislava Region exceeds 732,000 inhabitants.
Features
Over 275 custom hand build buildings
Night textures
PBR textures
Compatible with Aerosoft Airport BratislavaBratislava, is the capital and largest city of Slovakia and the fourth largest of all cities on the river Danube. Officially, the population of the city proper is about 479,000; however, the wider Bratislava Region exceeds 732,000 inhabitants.
Features
Over 275 custom hand build buildings
Night textures
PBR textures
Compatible with Aerosoft Airport Bratislava
Etm10m For Crimea - Terrain Mesh
Enhanced Terrain Mesh (ETM) 10 meters for CRIMEA
ItalianCharter Team – Gjanosh61 With over a decade of experience in flight simulation development, I specialize in high‑resolution terrain mesh and VFR scenery enhancements. My work has been widely published on AVSIM Library and Flightsim. to, with thousands of downloads and strong community recognition. Focused on accuracy, realism, and technical innovation, I deliver products that bring new life to underrepresented regions, ensuring pilot... Enhanced Terrain Mesh (ETM) 10 meters for CRIMEA
ItalianCharter Team – Gjanosh61 With over a decade of experience in flight simulation development, I specialize in high‑resolution terrain mesh and VFR scenery enhancements. My work has been widely published on AVSIM Library and Flightsim. to, with thousands of downloads and strong community recognition. Focused on accuracy, realism, and technical innovation, I deliver products that bring new life to underrepresented regions, ensuring pilots enjoy immersive and authentic landscapes.
Product Details
This project does not include LOD optimization, as it is not required for this type of content. Instead, I performed a custom adaptation of default water bodies to ensure proper integration with the new terrain mesh.
Data Sources and Tools
DEM / DTM Based on Sentinel‑1 SAR processed in SNAP13 for maximum terrain accuracy reprocessed and optimized for MSFS.
Mesh Technology: Proprietary, developed in-house,
Key Features
10-meter (1/3 arc sec) terrain mesh resolution, based on Sentinel-1 data, offering a dramatic improvement over default SRTM1 (30m) coverage.
Water body adaptation: default lakes, shorelines, and coastal flats have been flattened and reshaped to match the new elevation model.
Optimized for VFR flying; to fully appreciate the terrain detail, it is recommended to fly below 500 feet AGL.
#MSFS2024 #VFR # TerrainMesh #ETM10m