Results for:
Found: 3675
Filters
SAWC El Calafate International Airport On Sale
New airport of Bella Patagonia Argentina.
"El Calafate International Airport" SAWC. This development is the external representation of the airport, trying to be as close to the real thing as possible.
- All land services available.
- It has the open hangar of the "Aeroclub Lago Argentino".
- New gateway recently installed.
General information:
El Calafate "Comandante Armando Tola" International Airport, (IATA: FTE - ICAO: SAWC - FAA: ECA) is an airport serving ... New airport of Bella Patagonia Argentina.
"El Calafate International Airport" SAWC. This development is the external representation of the airport, trying to be as close to the real thing as possible.
- All land services available.
- It has the open hangar of the "Aeroclub Lago Argentino".
- New gateway recently installed.
General information:
El Calafate "Comandante Armando Tola" International Airport, (IATA: FTE - ICAO: SAWC - FAA: ECA) is an airport serving the city of El Calafate, in the province of Santa Cruz, Argentina. The airport is located 23 km from the city center.
It has a single track of 2,550 x 45 m and a terminus of 2,800 m². The airport was built by the Government of the Province of Santa Cruz in two stages:
Runway, Platform, Taxiway and Access Road: through the General Administration of Provincial Highways (AGVP), public tender awarded to the companies Esuco SA - Decavial SA UTE, start date: October 1997. Completion date: May 1999. Construction Inspector for AGVP: Ing. Alejandro Sofía, Technical Representative and Construction Manager: Ing. Mauro Guatti.
Terminal Building: a year later, through a public works concession from the Government of the Province of Santa Cruz, the construction and operation of the Terminal Building and Infrastructure was awarded to the London Supply Company, who appointed Mario Feldman as general director of works ( 1941-2003). It was inaugurated in November 2000. It was built to replace the Lago Argentino Airport. This airport has undergone a significant expansion carried out in 2014. This has increased the operational capacity and the concurrence factor. In 2016 it received about 12 daily flights and together with the new SAMIC Hospital in El Calafate inaugurated in 2015, the airport has improved its category.
The terminal was designed by Carlos Ott, a Canadian nationalized Uruguayan architect, who was also responsible for the passenger terminal at the International Airport of Ushuaia and Punta del Este - Uruguay. For this reason, the terminals have similar characteristics: a rich stone design and cantilevered roof plans, appropriate to the climatic characteristics of the area.
El Calafate International Airport is an important means of access for tourists visiting Los Glaciares National Park.
Zadar-LDZD-puljevic Design V5
This is my LDZD-Zadar MSFS2020 scenery complitely corrected and adapted for MSFS2024. Version v5. In this version, according to real situation, there is enlarged apron with new distribution of parking positions.
ZADAR AIRPORT is photoreal scenery of the airport located in the northern part of Dalmatia on Adriatic coast. Zadar Airport (IATA: ZAD, ICAO: LDZD) is an international airport serving Zadar, Croatia. It is located in Zemunik Donji, 8 km from the centre of Zadar. Over time the ... This is my LDZD-Zadar MSFS2020 scenery complitely corrected and adapted for MSFS2024. Version v5. In this version, according to real situation, there is enlarged apron with new distribution of parking positions.
ZADAR AIRPORT is photoreal scenery of the airport located in the northern part of Dalmatia on Adriatic coast. Zadar Airport (IATA: ZAD, ICAO: LDZD) is an international airport serving Zadar, Croatia. It is located in Zemunik Donji, 8 km from the centre of Zadar. Over time the airport has grown to become Croatia's 4th largest international airport, handling 801,347 annual passengers. It was one of a few airports in the world where the taxiway crossed a public road. The road was closed 2010 due to terms negotiated with the European Union during Croatian accession negotiations. Last year underpass bellow taxyway was built and road is open again. At the beginning of April 2013, Zadar Airport became a Ryanair base with a stationed Boeing 737-800. It serves 8 European destinations in Belgium, Germany, Italy and Poland.
The airport also is a Croatian Air Force main training base. It used to be a base for Lufthansa's InterCockpit flight school.
Features:
Highly detailed photoreal scenery of the airport (civil and military part) with all custom made objects and clear textures based on high resolution photos.
Scenery includes all last modifications od the airport (enlargement of the apron with new correct apron positions and signs according to recent charts, underpass bellow taxyway, correct new signs of the runway. ,real both slope runways, custom military static aircrafts, semitransparent glass terminal windows, custom 3 D trees, dynamic lighting and night illumination. .
Split Airport LDSP V.2
This is v2. 0 scenery version (without apron signs flickering in TAA mode)
Split airport(LDSP) is one of the three main airports in Croatia (LDZA, LDDU and LDSP). Airport is situated near the Adriatic coast with very interesting approaches, because of the surrounding mountains and the beautiful landscape.
During the last two years, airport has been mostly rebuilt with a completely new terminal, which was opened last summer. This scenery includes all modifications and reconstructi... This is v2. 0 scenery version (without apron signs flickering in TAA mode)
Split airport(LDSP) is one of the three main airports in Croatia (LDZA, LDDU and LDSP). Airport is situated near the Adriatic coast with very interesting approaches, because of the surrounding mountains and the beautiful landscape.
During the last two years, airport has been mostly rebuilt with a completely new terminal, which was opened last summer. This scenery includes all modifications and reconstructions of the actual airport. As the airport is located on a sloping terrain, some facilities are at different levels, which is extremely precisely modeled in the scenario. Also, the runway is not flat, than it is significantly multiple sloped in the shape of the letter S, which was also reconstructed in detail. The scenery further includes hundreds of custom objects (old town Trogir, shipyard, bridges, churches, custom trees etc).
Features of the scenery:
- Airport Split (LDSP) and the Military Base „Divulje“ (LDHD) with wide surrounding.
- Real and precise multi-elevation airport model and runway surrounding area.
- Very precise and real slope runway and taxyways.
- Detailed ground markings based on recent charts.
- Extremely detailed airport buildings with semitransparent windows of both terminals with real interior designs.
- Custom 3D trees.
- Photoreal textures of the all objects and buildings on the airport based on onside HD photos.
- Dynamic lighting and night illumination
EDDV Hannover Airport
Hannover Airport (IATA: HAJ, ICAO: EDDV) is the international airport of Hannover, capital of the German state of Lower Saxony. The ninth largest airport in Germany, it is in Langenhagen, 11 km north of Hannover. The airport has flights to European metropolitan and leisure destinations, and serves as a base for Eurowings, Condor, SunExpress Deutschland and TUI fly Deutschland.
Hannover Airport has three passenger terminal concourses named Terminals A, B, and C. The landside areas with shops,... Hannover Airport (IATA: HAJ, ICAO: EDDV) is the international airport of Hannover, capital of the German state of Lower Saxony. The ninth largest airport in Germany, it is in Langenhagen, 11 km north of Hannover. The airport has flights to European metropolitan and leisure destinations, and serves as a base for Eurowings, Condor, SunExpress Deutschland and TUI fly Deutschland.
Hannover Airport has three passenger terminal concourses named Terminals A, B, and C. The landside areas with shops, restaurants, and travel agents are interconnected, but each has its separate airside area with a few more facilities. Terminals A and B each have six boarding gates equipped with jet bridges, while Terminal C has eight of them. [4] Additional bus gates are available in each concourse. Terminal A underwent a major refurbishment as the first concourse from April 2013 and reopened on 9 July 2014.
The additional Terminal D to the east of the main terminal is a rebuilt hangar which is exclusively used by the Royal Air Force to transport British troops to and from Northern Germany.
Flight Sim First Officer Jf Bae 146
Flight Simulator First Officer Next for BAE 146 is a virtual copilot coded to work exclusively with the Just Flight's BAE 146. It adds a whole new level of realism by providing a copilot to share cockpit responsibilities. FSFO does not require strict adherence to Standard Operating Procedures (i. e. scripts), reading lengthy manuals, memorizing actions to trigger other actions, or precise speech. To that end, it can be as complex or simple as you want. Just hit connect and fly with confidence... Flight Simulator First Officer Next for BAE 146 is a virtual copilot coded to work exclusively with the Just Flight's BAE 146. It adds a whole new level of realism by providing a copilot to share cockpit responsibilities. FSFO does not require strict adherence to Standard Operating Procedures (i. e. scripts), reading lengthy manuals, memorizing actions to trigger other actions, or precise speech. To that end, it can be as complex or simple as you want. Just hit connect and fly with confidence that your First Officer is helping you fly this amazing aircraft.
Features:
- Speech Recognition
- Command the First Office to set the flaps, gear, autopilot, takeoff thrust, and execute the flows and checklists. See the guide for a complete list of voice command options
- Checklist can be controlled via voice or completely automated
- Ground Crew Operations:
- Control pushback via Voice or Buttons
- Automatically trigger the fuel truck, luggage cars and jetway, or request via operations panel
- Simulate Passenger and Cargo Boarding with ambient sounds
- Flight Deck Announcements
- Welcome Aboard (message depends on time of day)
- Safety Message
- Flight Attendants “Prepare for Takeoff”
- 10,000 ft chime
- We’ve reached our cruise altitude (message depends on turbulence)
- Descent Announcements (e. g. , electronics off and night time landing messages)
- Flight Attendants “Prepare for Landing”
- Welcome to our destination (message depends on time of day)
- Integrated Flows and Checklists
- Flows - When activated, the copilot will check each system to ensure its set correctly for a specific flight phase; if it's not set correctly, he will configure said system. Using this system, FSFO will completely configure the aircraft for you, which will spare you the need to read 300+ page manuals.
- Checklist - When called, the copilot will call the checklist item
- If using button mode - if the systems is set correctly, he will proceed to the next item; if it's not, he will wait for the pilot to configure the system before proceeding to the next call.
- If using Voice mode – The Copilot will wait for a verbal response (e. g. , checked, set, on, off, etc. …)
- Speed Calls:
- Copilot call Power Set
- Copilot calls Speed Alive
- Copilot calls 80 Knots on takeoff and 100, 80 and 60 Knots on landing
- Copilot calls V1, Rotate, and V2
- Copilot calls “400 ft” and “Acceleration Altitude”
- Vref monitoring (i. e. , copilot will advise the captain when the airspeed falls below the imputed value on landing)
- Engine Callouts:
- Copilot calls “Engine x Started”
- Copilot calls “Engine x Cutout
- Copilot calls “All Engines Stable”
- Safety Checks:
- Before Takeoff - Copilot checks the flaps, trims and autobrakes; if they're incorrect, he will warn you
- After Takeoff - Copilot checks the landing gear and flaps; if they're incorrect, he will warn you
- Before Landing - Copilot checks the landing gear, flaps and spoilers; if they're incorrect, he will warn you
- Doors – Copilot will warn you anytime the engines are running and the main door is opened
- Copilot Options:
- Manages Autopilot – Copilot can turn on/off Vnav, Lnav, A/T, and Master Autopilot
- Manages Gear – Copilot can raise/lower the gear at the designated altitudes
- Manages Flaps – Copilot will raise/lower the flaps at the designated speeds
- Manages Altimeters - Copilot can set altimeters based on flight parameters
- Speed Warns - Copilot warns with IAS goes above 250 knots below 10K ft AGL, when Ground Speed is too high (30 mph), or when the IAS falls below VREF during landing
- Manages Lights - Copilot can turn on/off ALL interior and exterior lights at the appropriate altitudes and time of day
- Systems monitoring - Copilot can also callout flap changes, parking brake, landing and spoiler status. For example, if you retract the flaps from 5 to 1, the copilot will call “Flaps 1. ” If the landing gear is extended, the Copilot calls “landing gear down”
- Manages Copilot EFIS controls – Copilot will set his controls based on flight parameters (e. g. , App Mode when capturing the ILS and terrain map on takeoff/landing)
- Manages FMC – Copilot will set his FMC based on flight parameters (e. g. , LEGS page on Takeoff, PROG page in Cruise, sets VREF on descent and aligns IRS during the Preflight Flow)o
- Manages MCP – Copilot will set IAS, HDG, LNAV, VNAV, A/T, HDG SEL and FDs.
- Career and Company Modes
- Career - Lets you build your life as a virtual airline pilot. Start your career, progress through the ranks, fly assigned routes, manage fatigue, improve your reputation, and work toward becoming a senior captain.
- Company - Lets you create and manage your own aviation company. Purchase or lease aircraft, accept contracts, hire AI pilots, manage maintenance, protect your reputation, and grow your operation from a small startup into a larger virtual airline or cargo company.
- Voices & Accents
- FSFO includes a wide selection of high-definition voice packs designed to make your virtual cockpit feel more natural, immersive, and alive.
Choose from multiple built-in voice options, including EnglishHD, English2HD, BritishHD, FrenchHD, German, GermanHD, and Matt, with additional support for optional Windows SAPI voices for the Pilot, Co-pilot, and Cabin Crew.
- Plus MANY more regions available for download
- Record your own custom sounds if you prefer.
- And much more…
Riverside Municipal (KRAL)
Riverside Municipal Airport ( ICAO: KRAL), is four miles (6 km) southwest of downtown Riverside, the county seat of Riverside County, California, USA.
The Riverside Municipal Airport is the busiest FAA Federal Contract Tower in the state of California (FAA fiscal year 2023-2024). The Riverside Municipal Airport ranks 116th out of 526 airports nationwide in total operations.
The airport covers 525 acres (212 ha) and has two runways.
KRAL remains cutting edge hosting 144,000 annual ope... Riverside Municipal Airport ( ICAO: KRAL), is four miles (6 km) southwest of downtown Riverside, the county seat of Riverside County, California, USA.
The Riverside Municipal Airport is the busiest FAA Federal Contract Tower in the state of California (FAA fiscal year 2023-2024). The Riverside Municipal Airport ranks 116th out of 526 airports nationwide in total operations.
The airport covers 525 acres (212 ha) and has two runways.
KRAL remains cutting edge hosting 144,000 annual operations, annual special events, and is outfitted with an ILS (Instrument Landing System) and VOR (VHF Omnidirectional Radio). Runway 9/27 has a Visual Approach Slope Indicator and is 5,401 x 100 ft. (1,646 x 30 m). The crosswind runway 16/34, is suited for smaller aircraft. Runway 34 has a Precision Approach Path Indicator.
Riverside Municipal Airport has been home to Civil Air Patrol Squadron 5 since 2005. In 2013, FedEx Express, a cargo airline, donated a Boeing 727-200F to California Baptist University for its new aviation science program. The aircraft is on permanent display at the airport and provides a working laboratory for aviation science students.
Take off from RIVERSIDE and enjoy the beautiful Golden State#!
Abumusa Island Airport
Abu Musa Airport (OIBA) is located in a strategic spot in the Persian Gulf, playing a vital role in passenger transport and aviation support in southern Iran. Built on a small yet beautiful island, the airport’s runway lies parallel to the shoreline, offering a unique takeoff and landing experience with breathtaking turquoise sea views.
In this custom-made scenery for Microsoft Flight Simulator, the airport has been recreated with care and attention to realism:
-
Domestic termi... Abu Musa Airport (OIBA) is located in a strategic spot in the Persian Gulf, playing a vital role in passenger transport and aviation support in southern Iran. Built on a small yet beautiful island, the airport’s runway lies parallel to the shoreline, offering a unique takeoff and landing experience with breathtaking turquoise sea views.
In this custom-made scenery for Microsoft Flight Simulator, the airport has been recreated with care and attention to realism:
-
Domestic terminal featuring complete architectural details and accurately modeled interiors.
-
Control tower with precise modeling and realistic textures.
-
Rebuilt surrounding areas including support buildings, hangars, and service zones.
-
Stunning night lighting, from runway and taxiway lights to the warm glow of the terminal and control tower, turning the airport into a sparkling jewel in the Persian Gulf at night.
-
Accurate markings, signage, and navigation lights for a fully professional flight experience.
-
The package also comes with a GSX profile for enhanced ground services.
This scenery transforms Abu Musa Airport into a captivating destination for virtual pilots, offering the feeling of being in a strategic location with unforgettable Persian Gulf sunsets.
The package also comes with a GSX profile for enhanced ground services.
DTTF - Gafsa-Ksar Intl Airport
Gafsa-Ksar International Airport (GAF/DTTF) is situated in central Tunisia, serving the regions of Gafsa and Ksar. The add-on features a detailed reconstruction of the airport, including a handcrafted passenger terminal, control tower, and fire station, along with accurate airfield wayfinding elements and lighting. Additional enhancements include a custom perimeter wall, improved landside features, and dedicated helipads. Although the airport currently lacks scheduled passenger service, its real... Gafsa-Ksar International Airport (GAF/DTTF) is situated in central Tunisia, serving the regions of Gafsa and Ksar. The add-on features a detailed reconstruction of the airport, including a handcrafted passenger terminal, control tower, and fire station, along with accurate airfield wayfinding elements and lighting. Additional enhancements include a custom perimeter wall, improved landside features, and dedicated helipads. Although the airport currently lacks scheduled passenger service, its realistic representation adds depth to flight simulation experiences in the area.
Miami Reefs
Complete rebuild the Miami area reefs; processing ortho images 3D models format. The reef coverage is now complete for the whole of the Miami area; reefs now blend into default water and visible underwater. Installation is straight forward; but please make sure to read the Instructions that are written with the Readme. txt file distributed with this package. The reefs are real world satellite / ortho images as such the shape and location is accurate as possible. These reefs work with either DL... Complete rebuild the Miami area reefs; processing ortho images 3D models format. The reef coverage is now complete for the whole of the Miami area; reefs now blend into default water and visible underwater. Installation is straight forward; but please make sure to read the Instructions that are written with the Readme. txt file distributed with this package. The reefs are real world satellite / ortho images as such the shape and location is accurate as possible. These reefs work with either DLSS or TAA. Reefs resolution are set to 2 m average in this package. Free for Global Trees and Hawaii Reefs packages users.
Hudson River Bridges
The package works with both MSFS2020 and MSFS2024
This package models the bridges of the large wide Hudson River from just north of New York City for 200 miles to Waterford 18 miles north of Albany. See the covered area in one of the photos.
Bridges at the mouth of the Mohawk and the Popolopen tributaries flowing into the Hudson have also been modeled.
Many of the bridges are very large with some over a mile wide. All bridges have been modeled in the correct architectural ... The package works with both MSFS2020 and MSFS2024
This package models the bridges of the large wide Hudson River from just north of New York City for 200 miles to Waterford 18 miles north of Albany. See the covered area in one of the photos.
Bridges at the mouth of the Mohawk and the Popolopen tributaries flowing into the Hudson have also been modeled.
Many of the bridges are very large with some over a mile wide. All bridges have been modeled in the correct architectural style with appropriate night lighting and road traffic flowing on the bridges.
The river is tidal all the way north to Albany and is able to accommodate ocean going traffic. Marinas and boat traffic has been improved in the package.
POIs have been placed at each model and are listed below.
Photogrammetry must be ON to ensure models integrate correctly with the sim.
Bridges modeled are listed below:
- Bear Mountain Bridge
- Popolopen Creek Rail Bridge
- Popolopen Suspension Bridge
- Popolopen Arch Bridge
- Newburgh Beacon Bridge
- Hamilton Fish Bridge
- Mid-Hudson Bridge
- Walk over Hudson Bridge
- Kingston Rhinecliff Bridge
- Rip Van Winkle Bridge
- Alfred H Smith Bridge
- Castleton on Hudson Bridge
- Dunn Bridge
- Quay St Rail Bridge
- I-90 Bridge
- Troy Menands Bridge
- Congress St Bridge
- Green Island Bridges (2)
- Collar City Bridge
- Mohawk Trail Bridge
- Ontario St Bridge
- Delaware Ave Trail Bridge
- Second St Trail Bridge
- Troy Waterford Bridge