Results for:
Found: 20
Filters
Chamonix and Aosta Valley Huts and Helipads On Sale
Elevate Your Rotorcraft Experience in the Mont Blanc Massif
Prepare for the ultimate high-altitude challenge. Chamonix and Aosta Valley Huts and Helipads brings the breathtaking, treacherous beauty of the French and Italian Alps directly to Microsoft Flight Simulator 2024. Expertly crafted for helicopter enthusiasts and mountain rescue simulation, this scenery pack features true-to-life depictions of five iconic alpine refuges nestled across the Mont Blanc massif.
Whether you are executin... Elevate Your Rotorcraft Experience in the Mont Blanc Massif
Prepare for the ultimate high-altitude challenge. Chamonix and Aosta Valley Huts and Helipads brings the breathtaking, treacherous beauty of the French and Italian Alps directly to Microsoft Flight Simulator 2024. Expertly crafted for helicopter enthusiasts and mountain rescue simulation, this scenery pack features true-to-life depictions of five iconic alpine refuges nestled across the Mont Blanc massif.
Whether you are executing a precision supply drop, running a MedEvac simulation, or simply testing your hovering skills in thin mountain air, this add-on demands absolute mastery of your machine.
Key Highlights
- Refuge du Goûter (3,835m / 12,582ft): The crown jewel of the normal route to Mont Blanc. As the highest wardened hut in France, its stunning futuristic architecture balances precariously on a snowy ridge. Approaches here require careful management of density altitude and unpredictable alpine crosswinds.
- Rifugio Walter Bonatti (2,025m / 6,644ft): Situated in the lush Val Ferret in Italy, this beautiful stone refuge faces the imposing Grandes Jorasses. A slightly lower altitude provides a perfect warm-up for rotorcraft pilots before heading into the extreme elevations of the high massif.
- Refuge des Grands Mulets (3,051m / 10,010ft): Perched upon an isolated, pyramidal rock island amidst the fractured ice of the Bossons Glacier. The helipad offers zero margin for error, surrounded by towering seracs and deep crevasses on the historic northern route.
- Rifugio Monzino (2,590m / 8,497ft): Located on the steep Italian side of the massif, this hut guards the approach to the formidable Aiguille Noire de Peuterey. Expect sharp updrafts and tight maneuvering clearances against the vertical granite walls.
- Refuge du Requin (2,516m / 8,255ft): Overlooking the legendary Mer de Glace and the Vallée Blanche. Named after the "shark fin" rock towering above it, this location offers spectacular glacier vistas and a uniquely challenging cliffside landing zone.
Features
- Accurate helipad placements for realistic alpine operations.
- Hand‑crafted 3D models based on real architectural details.
- Immersive terrain integration with MSFS 2024’s advanced weather and lighting systems.
- Perfect for helicopter pilots and bush flyers seeking challenging landings in extreme environments.
This scenery pack transforms the Chamonix region and Aosta Valley into a playground for adventure, combining authentic alpine architecture with high‑fidelity helipad operations. Whether you’re simulating rescue missions, practicing precision landings, or simply exploring the Mont Blanc massif, these huts and helipads deliver realism and excitement at every altitude.
Aloft - Glider Assistant App
Do to a lack of interest, Aloft is being phased out.
Aloft — Glider Assistant App for MSFS 2020 & 2024
Aloft is a lightweight companion for Microsoft Flight Simulator (2020/2024). It works with any aircraft, with additional features for gliders, and exclusive features for Diana 2 owners. Designed to be quick and practical during normal flying — clear menu sections, direct controls, and a window you can keep visible over the simulator.
✈ General Features
- Alwa... Do to a lack of interest, Aloft is being phased out.
Aloft — Glider Assistant App for MSFS 2020 & 2024
Aloft is a lightweight companion for Microsoft Flight Simulator (2020/2024). It works with any aircraft, with additional features for gliders, and exclusive features for Diana 2 owners. Designed to be quick and practical during normal flying — clear menu sections, direct controls, and a window you can keep visible over the simulator.
✈ General Features
- Always on Top — keeps the app above other windows; ideal for monitoring the live map while flying on a 4K or multi-monitor setup
- Draggable window — reposition from any area without an interactive control
⚙️ Settings
- Community Folder — required first-time setup; auto-detect or browse manually
- Close app with sim — app quits when the simulator closes
- Start app with sim — app launches automatically when the simulator starts
- Minimize to tray — keeps the app active in the background when minimized
- Start minimized — launches directly to the system tray
- Remember window position — reopens where you left it, including on secondary monitors
- Confirm deletions — optional prompt before removing items
- App sounds — click and feedback audio on or off
- Show tooltips — hover hints for all controls
- UI Scale — resize the entire interface
- Language — available in 15 languages: English, German, French, Spanish, Italian, Dutch, Polish, Russian, Czech, Finnish, Slovenian, Hebrew, Chinese, Arabic, and Hindi
❤️ Aircraft Health
- Live condition monitoring panel — works with any aircraft
- Values update in real time during climb, manoeuvring, and landing
- Also available inside the Diana 2 tablet
- Oxygen system monitoring
🚦 Taxi Mode
- Drive your aircraft on the ground with precise speed control — tap Forward or Reverse to add or subtract 1 kt at a time (up to 20 kt in either direction)
- Speed displayed in a large cockpit-style readout; steer with your rudder pedals
- Stop instantly with the Stop button — disengages immediately
🛫 Tow Plane
- Call a tow plane from any location on the map
- Choose from preset AI flight plans or record your own custom tow path
- Quick Glide — set your desired altitude in feet and spawn immediately at your current position, no waiting for a tow
🎥 Cameras
⚠️ Work in Progress — functional now and will be significantly expanded with more controls and options in future updates.
- Create, save, and reuse camera presets and animated keyframe sequences
- Tri-view editor — drag camera sources and targets freely on a top-down layout
- Dolly slider — moves camera and target together
- Zoom slider — adjusts lens only; camera and target stay in place
- Fine Tune mode — precise sub-pixel placement
- Single preset and animated keyframe sequences with variable playback speed (x1–x5)
🗺️ Live Map
Map Overlays
- Toggle independently: map type (street/terrain/satellite), traffic, airports, airport labels, weather, and wind
- Wind overlay — shows live wind direction and strength across the map at a glance; arrows indicate direction, colour intensity indicates speed
- AI Traffic — toggle on to see all AI aircraft currently active in the simulator on the map, including their type and heading
- Simulated Thermals — Aloft can inject simulated thermal activity into the simulator. Thermals appear on the Live Map so you can plan your soaring route before or during flight
Airport Search
- Search by airport name or ICAO code
- Sort alphabetically (ABC) or by nearest to current position (DIST)
- Target line preview when browsing airports in the list
Teleport
- Drag the red crosshair to any map location and press Teleport to spawn there
- Default spawn altitude is 3,000 ft (adjustable)
- Reset Position re-centres the map on your aircraft and keeps it tracked until you pan
Multiplayer
- Toggle Transmit Multiplayer Data to appear on the shared map and see all other connected pilots
- Set a unique Pilot Name visible to everyone
- Player icons update every second: position, aircraft type, and livery
- Connected Players list sortable by name (ABC) or distance (DIST)
- Direction line and map follow for any pilot in the list
- Player distance colour-coding: Gray (no data yet) · Blue (<5 nm) · Green (5–20 nm) · Red (20–50 nm) · Black (>50 nm)
- Proximity alerts: Proximity (<1 km) · Warning (<500 m) · Critical (collision imminent)
- Right-click any pilot or AI aircraft on the map to request an aerotow hookup
- Cross-platform — MSFS 2020 and MSFS 2024 pilots share the same private server and spawn as full 3D aircraft inside each other’s simulators simultaneously
- Friends List — add pilots to your Friends List; friends always appear on your map and Connected Players list regardless of distance. Other pilots outside your proximity range are automatically hidden to keep the map uncluttered
2D Livery Icons — Share Your Aircraft on the Map
Every pilot on the multiplayer map is shown as a top-down 2D icon of their actual aircraft and livery. Diana 2 and default MSFS aircraft have icons built in. For any other aircraft or custom livery, use the built-in Icon Creation tool to create and share your own — automatically uploaded and visible to all connected pilots in real time.
📋 Profiles & Flight Logs
Pilot Profiles
- 8 fully renameable profile slots
- Each profile stores: flight logs, favourite locations, and task plans. Diana 2 owners also store a saved LX9050 instrument layout per profile (V80 layout saving planned)
- Diana 2: switching profiles prompts you to load the LX9050 layout saved under that profile — accept or skip
Flight Logs
- Automatic recording — every flight from takeoff to landing logged automatically
- Manual recording with pause and resume support
- Search bar and sortable category tabs
- B21 Task Planner integration — open any flight log directly in the B21 browser-based task planner
- Built-in Flight Reviewer — replay any recorded flight with forward and reverse playback, variable speed, and a scrub timeline
- Spawn up to 10 3D aircraft in the simulator to replay the flight — any aircraft type, any combination
- 3 formation modes — control how the 10 spawned aircraft are arranged relative to each other
- Teleport to the replay spawn point mid-flight
Favourite Locations
- Bookmark any position mid-flight and teleport back to it at any time
Task Plans
- Glider task plans define route, turnpoints, and finish — enabling real-time calculations: remaining distance, required glide ratio, and speed-to-fly
- Create tasks in B21 Task Planner or directly on the Diana 2 LX9050 in-sim flight computer — tasks sync automatically to the Live Map
- Import . TSK files or save tasks from the LX9050; Diana 2 owners can push saved tasks back to the instrument in one click
📖 Built-in Manuals
All product manuals are available directly inside the app — no external browser or PDF needed.
💠 Diana 2 Exclusive Features
These features require the Diana 2 glider to be installed.
- Bug Contamination — insect accumulation progressively degrades aerodynamic surfaces during flight. Onboard cleaners restore performance. Visible in real time in the Aircraft Health panel.
- Twitch Integration — import your subscribed Twitch channels into Aloft; they appear in the app and directly inside the Diana 2 tablet (especially useful in VR).
🗓️ Planned Updates — Free for All Users
All updates are free. The following features are actively planned for upcoming releases:
- Camera System Expansion
- V80 Layout Saving — save and restore your V80 panel layout per Diana 2 profile (the panel layout system is a Diana 2 exclusive feature)
- More Built-in Aircraft Icons — the 2D multiplayer icon library is continuously growing with new aircraft and livery additions
- More Glider Specific Features
Requirements
- Microsoft Flight Simulator 2020 or 2024
- Windows 10 or 11 (64-bit)
- Active internet connection for multiplayer features
Fwx Ec135 Real Turbine Sound Mod
FWX EC135 Real Turbine Sound Mod: the sound pack that completely replaces the stock EC135 sounds in Microsoft Flight Simulator 2024
The EC135 finally sounds like a turbine. This mod replaces the aircraft sound completely, inside and out, with recordings of a real EC135.
The stock EC135 sounds are flat and characterless. After the swap you hear two turbines that spool up separately, shut down separately, and let you abort a start.
What is this sound pack? A sound pack that ... FWX EC135 Real Turbine Sound Mod: the sound pack that completely replaces the stock EC135 sounds in Microsoft Flight Simulator 2024
The EC135 finally sounds like a turbine. This mod replaces the aircraft sound completely, inside and out, with recordings of a real EC135.
The stock EC135 sounds are flat and characterless. After the swap you hear two turbines that spool up separately, shut down separately, and let you abort a start.
What is this sound pack? A sound pack that completely replaces the stock EC135 sounds, inside and out, with recordings of a real EC135. It changes nothing about flight behavior and nothing about the visuals: the simulator flight model and the look of the aircraft stay untouched. It affects the EC135 only, every other helicopter stays untouched. Uninstalling restores the stock sounds.
Two turbines that do not run in lockstep
The engines are separate. You notice it immediately, because the two turbines do not run alike.
- Uneven start: the second engine does not spool up like the first
- Uneven shutdown: each turbine runs down on its own
- Single-engine taxi, audible as one turbine running alone
Abort the spool-up, like on the real aircraft
The start sequence can be aborted. You can stop the spool-up at any point, and the sound follows you.
- Seamless from the starter into the running turbine, no gaps, no cuts
- Smooth load changes instead of audible pitch jumps
Power you can hear
Rotor speed stays constant, the aircraft takes care of that itself. So what you hear is not the rotor speed but the work the turbines are doing: when the flight calls for more power, they work harder to hold that speed, and that is exactly what you hear at the very same moment. When less power is needed, they audibly ease off while the rotor speed stays up.
- More power: the turbines audibly dig in, the rotor speed stays the same
- Less power: the sound falls back just as clearly, the rotor speed stays up
- Climb, hover, descent: every load state sounds different, because the turbines have a different amount of work to do
- Turbine sound across every phase of flight: cold start, spool-up, idle, flight, shutdown
From the outside: the Fenestron and two turbines
The Fenestron, the shrouded tail rotor of the EC135, is what makes it recognizable. That exact sound is brought out in the exterior mix, not just carried along.
- The unmistakable tone of the Fenestron on a flyby and in the hover
- The characteristic twin-turbine whine
- Rotor downwash, flyby and hover fully reworked
- Dedicated sound files for every exterior view
VR compatible
The sound works no matter which view you fly in: in the cockpit, in the exterior view and with a VR headset on.
Reviewed by SimFlight, Threshold and MSFS Addons.
What it cannot do
- It affects the EC135 only, every other helicopter stays untouched
- It changes nothing about flight behavior and nothing about the visuals
- It produces no vibration, that is what the FWX Rotor Blade Haptic is for
Works with your other add-ons
- Compatible with ChasePlane and FSRealistic
- No impact on frame rate
- Works alongside the FWX Rotor Blade Haptic without hindering it
Installation and uninstallation
- Click-through installer, pick the folder, done
- You can uninstall in two ways: through our own FWX application or through the Windows program list
- Uninstalling restores the stock sounds
Note: package order in the package library
It can happen that the package order has to be set by hand for the sound to take effect. This refers to the settings in the simulator under the package library. The installer walks you through it with a confirmation dialog. If you set it by hand, do this once:
- Open General Options, Advanced Options, Package Order Tool
- Enable the tool and clear the "Scenery packages only" checkbox
- Search for "135"
- Move the FWX Sound Pack below the Nemeth Design EC135
- Restart the simulator
Updates
Free updates, new sound content at no extra charge.
Also available as a bundle
- FWX HELI FLIGHT DYNAMICS & ROTOR EFFECTS
- FWX HELICOPTER ALL-IN-ONE BUNDLE MSFS24
More information: finnwestx1. com
Vibrafile Inibuilds Hunter Apache
Experience the AH‑64 Apache like never before. This VibraFile delivers a meticulously engineered haptic profile built from real‑world rotor dynamics, transmission harmonics, and the unmistakable four‑blade pulse that defines the Apache’s presence. Designed for SimHub‑based haptic systems, it transforms every phase of flight into a tactile, instinct‑driven experience.
Features
-
Authentic Rotor Signature Deep, powerful low‑frequency main‑rotor cues that scale with torque, collec... Experience the AH‑64 Apache like never before. This VibraFile delivers a meticulously engineered haptic profile built from real‑world rotor dynamics, transmission harmonics, and the unmistakable four‑blade pulse that defines the Apache’s presence. Designed for SimHub‑based haptic systems, it transforms every phase of flight into a tactile, instinct‑driven experience.
Features
-
Authentic Rotor Signature Deep, powerful low‑frequency main‑rotor cues that scale with torque, collective, and maneuvering.
-
Tail Rotor & Transmission Detail High‑frequency harmonics tuned to pedal input, RPM, and load for precise handling feedback.
-
Engine & Powertrain States Distinct vibration profiles for start‑up, idle, spool‑up, cruise, and combat‑power transitions.
-
Flight‑Regime Awareness Hover shudder, ETL cues, blade‑loading effects, and high‑speed vibration shifts for maximum realism.
-
Ground & Touchdown Effects Skid resonance, rotor‑wash rumble, and landing impacts crafted for clarity and immersion.
Built for Immersion
Every frequency band is hand‑tuned for clean, powerful output without clipping or mud. Whether you fly in VR or pancake mode, this profile gives the AH‑64 the physical presence it deserves.
Ideal For
-
VR pilots
-
Apache enthusiasts
-
SimHub haptic setups
-
Anyone seeking deeper realism in MSFS
AZ15 - Supai Village Helipad On Sale
Discover the heart of the Grand Canyon like never before with this meticulously crafted scenery add-on for Microsoft Flight Simulator 2024. Centered around the Havasupai Indian Reservation helipad in Supai, Arizona, this package brings unparalleled realism and artistry to one of the most remote and breathtaking destinations in the United States.
This add-on transforms Supai into a vibrant, living environment—perfect for bush pilots, helicopter enthusiasts, and adventurers seeking challenging... Discover the heart of the Grand Canyon like never before with this meticulously crafted scenery add-on for Microsoft Flight Simulator 2024. Centered around the Havasupai Indian Reservation helipad in Supai, Arizona, this package brings unparalleled realism and artistry to one of the most remote and breathtaking destinations in the United States.
This add-on transforms Supai into a vibrant, living environment—perfect for bush pilots, helicopter enthusiasts, and adventurers seeking challenging approaches. Whether you’re flying in at sunrise with canyon shadows stretching across the landscape or hovering above the turquoise waters of Havasu Creek, the experience is unforgettable.
- Enhanced Ground & Terrain Details
- Iconic cascades such as Havasu Falls, Mooney Falls, and the elusive Hidden Falls have been significantly improved
- Handcrafted structures and natural features with PBR textures, bring Supai’s unique character to life.
Striker
Introducing the KwikFlight Striker, a modern twin-seat attack and reconnaissance helicopter built for precision, agility, and dominance. Designed for intense low-level operations and hands-on mission flying, the Striker delivers an immersive combat rotorcraft experience that blends accessibility with depth.
Take control from fully interactable front and rear cockpits, featuring a modern glass cockpit layout with four multifunction displays, a dual-function standby display, and dynamic keyboa... Introducing the KwikFlight Striker, a modern twin-seat attack and reconnaissance helicopter built for precision, agility, and dominance. Designed for intense low-level operations and hands-on mission flying, the Striker delivers an immersive combat rotorcraft experience that blends accessibility with depth.
Take control from fully interactable front and rear cockpits, featuring a modern glass cockpit layout with four multifunction displays, a dual-function standby display, and dynamic keyboard input for seamless systems management. A refined flight model with native vortex ring state simulation, advanced stability augmentation, and hands-off hover capability makes the Striker equally rewarding for new pilots and experienced rotorheads.
R22 Vibrafile
Feel the R22 exactly as it flies.
The R22 Vibrafile delivers the helicopter’s authentic vibration profile straight into your sim. Every shake, buzz, and rhythmic wobble is captured from real‑world data, giving pilots the tactile cues they rely on for RPM control, hover discipline, and aircraft awareness.
Built for students, instructors, and anyone who wants the real R22 experience, this vibrafile turns your sim session into meaningful training. Lightweight. Accurate. Instantly tr... Feel the R22 exactly as it flies.
The R22 Vibrafile delivers the helicopter’s authentic vibration profile straight into your sim. Every shake, buzz, and rhythmic wobble is captured from real‑world data, giving pilots the tactile cues they rely on for RPM control, hover discipline, and aircraft awareness.
Built for students, instructors, and anyone who wants the real R22 experience, this vibrafile turns your sim session into meaningful training. Lightweight. Accurate. Instantly transformative. Master the aircraft by mastering its feel.
Features
- Engine startup
- Cooling fan
- Main rotor with dynamic effects
- Vne
- VRS
- Autorotation
- Landing
- Skid scrape
- Engine shutdown
Waterfalls of Yellowstone: Northeast Quadrant On Sale
Experience the Thunder of the Falls & The Beauty of the Backcountry
Transform your helicopter and bush flying adventures in Microsoft Flight Simulator 2024 with Waterfalls of Yellowstone: Northeast Quadrant. This scenery package completely overhauls one of the most iconic yet challenging regions of the park, replacing default "flat" water textures with hand-crafted, animated 3D waterfalls and correcting terrain anomalies for a true-to-life VFR experience.
Whether you are hovering in a... Experience the Thunder of the Falls & The Beauty of the Backcountry
Transform your helicopter and bush flying adventures in Microsoft Flight Simulator 2024 with Waterfalls of Yellowstone: Northeast Quadrant. This scenery package completely overhauls one of the most iconic yet challenging regions of the park, replacing default "flat" water textures with hand-crafted, animated 3D waterfalls and correcting terrain anomalies for a true-to-life VFR experience.
Whether you are hovering in a helicopter or banking low in a Cub, discover the Grand Canyon of the Yellowstone and the rugged Tower-Roosevelt area as they were meant to be seen.
Key Features
- Upper & Lower Yellowstone Falls: Witness the majesty of the park’s crown jewels. The massive 308-foot Lower Falls and the crashing Upper Falls have been recreated with custom 3D water effects, mist, and accurate rock texturing, eliminating the "melting river" effect of the default scenery.
- Crystal Falls: Often missed by casual tourists but never by a bush pilot, this hidden gem located between the Upper and Lower falls on Cascade Creek has been fully modeled, adding depth and realism to the canyon approach.
- Tower Fall: Fly north to the Tower-Roosevelt area to see the spectacular 132-foot plunge of Tower Creek. The signature rock pinnacles (hoodoos) surrounding the brink have been sharpened and detailed, making it a perfect landmark for navigation.
- Viewpoint & Road Fixes: Say goodbye to broken immersion. We have created custom 3D models, terraformed and corrected elevation data for key scenic viewpoints and nearby roads. Roads no longer warp into cliffs or slide into rivers, ensuring a seamless visual experience for low-altitude flights and photography.
- Improved VFR Landmarks: Updated vegetation and rock formations around the falls serve as accurate visual references, matching real-world charts and maps.
Suggested Flight Path
Depart from West Yellowstone (KWYS) or Gardiner (29S) and follow the Yellowstone River into the park.
The Canyon Run: Drop into the Grand Canyon of the Yellowstone to catch the spray of the Lower Falls, then climb swiftly to spot Crystal Falls tucked into the southern wall before overflying the Upper Falls.
The Northern Leg: Follow the river north through the winding valleys toward Mount Washburn.
The Tower Finale: As you approach the narrows, bank sharp to reveal the dramatic spire of Tower Fall, perfectly framed by its volcanic rock needles.
Fictional helipads are also available If you want to spawn directly from the scenery locations: YS01V and YS01X.
Ufo Flying Saucer
Something beyond this Universe just landed. Now it's in your hands, what have Aliens been hiding from us?
EXTERIOR
- Highly detailed digital replica of a classic flying saucer
- High resolution textures
- Exterior lighting
- Three liveries
FEATURES
- Abduction beam
- Invisibility mode
- Spin mode
- Alien vision
- Orb drop
- Flares
COCKPIT
- Holographic control panel
- Custom views
MISC FEATURES
- Custom flight model including hov... Something beyond this Universe just landed. Now it's in your hands, what have Aliens been hiding from us?
EXTERIOR
- Highly detailed digital replica of a classic flying saucer
- High resolution textures
- Exterior lighting
- Three liveries
FEATURES
- Abduction beam
- Invisibility mode
- Spin mode
- Alien vision
- Orb drop
- Flares
COCKPIT
- Holographic control panel
- Custom views
MISC FEATURES
- Custom flight model including hover & flight modes
- User Manual
- Sim Ops
Ascendance ATEA On Sale
Take a bold step into the future of flight with the Ascendance ATEA, a cutting-edge hybrid-electric VTOL aircraft now brought to life in Microsoft Flight Simulator 2020. This high-fidelity simulation offers an immersive experience of one of the most anticipated aircraft in the next generation of urban and regional mobility.
The ATEA is designed with sustainability and innovation in mind—boasting a sleek, aerodynamic body, electric rotors for efficient vertical flight, and a quiet, low-emissi... Take a bold step into the future of flight with the Ascendance ATEA, a cutting-edge hybrid-electric VTOL aircraft now brought to life in Microsoft Flight Simulator 2020. This high-fidelity simulation offers an immersive experience of one of the most anticipated aircraft in the next generation of urban and regional mobility.
The ATEA is designed with sustainability and innovation in mind—boasting a sleek, aerodynamic body, electric rotors for efficient vertical flight, and a quiet, low-emissions hybrid-electric powerplant. This MSFS edition captures all of that with detailed 3D modeling, custom animations, and authentic flight dynamics tailored for the unique transition from hover to forward flight.
Features:
✅ Accurate hybrid VTOL flight model (custom-tuned for realistic hover, transition, and cruise modes)
✅ Fully interactive cockpit with advanced avionics and touchscreen displays
✅ Custom sound package including rotor transitions and turbine-electric startup/shutdown
✅ Detailed exterior and interior modeling using PBR materials and custom animations
✅ Realistic lighting, navigation, and environmental interaction
✅ Optimized for both PC and Xbox (when applicable)
Whether you're exploring urban skies or testing the limits of future flight, the Ascendance ATEA gives you the chance to pilot tomorrow’s technology—today.