Results for:
Found: 3684
Filters
Fwx Ec135 Real Turbine Sound Mod
FWX EC135 Real Turbine Sound Mod: the sound pack that completely replaces the stock EC135 sounds in Microsoft Flight Simulator 2024
The EC135 finally sounds like a turbine. This mod replaces the aircraft sound completely, inside and out, with recordings of a real EC135.
The stock EC135 sounds are flat and characterless. After the swap you hear two turbines that spool up separately, shut down separately, and let you abort a start.
What is this sound pack? A sound pack that ... FWX EC135 Real Turbine Sound Mod: the sound pack that completely replaces the stock EC135 sounds in Microsoft Flight Simulator 2024
The EC135 finally sounds like a turbine. This mod replaces the aircraft sound completely, inside and out, with recordings of a real EC135.
The stock EC135 sounds are flat and characterless. After the swap you hear two turbines that spool up separately, shut down separately, and let you abort a start.
What is this sound pack? A sound pack that completely replaces the stock EC135 sounds, inside and out, with recordings of a real EC135. It changes nothing about flight behavior and nothing about the visuals: the simulator flight model and the look of the aircraft stay untouched. It affects the EC135 only, every other helicopter stays untouched. Uninstalling restores the stock sounds.
Two turbines that do not run in lockstep
The engines are separate. You notice it immediately, because the two turbines do not run alike.
- Uneven start: the second engine does not spool up like the first
- Uneven shutdown: each turbine runs down on its own
- Single-engine taxi, audible as one turbine running alone
Abort the spool-up, like on the real aircraft
The start sequence can be aborted. You can stop the spool-up at any point, and the sound follows you.
- Seamless from the starter into the running turbine, no gaps, no cuts
- Smooth load changes instead of audible pitch jumps
Power you can hear
Rotor speed stays constant, the aircraft takes care of that itself. So what you hear is not the rotor speed but the work the turbines are doing: when the flight calls for more power, they work harder to hold that speed, and that is exactly what you hear at the very same moment. When less power is needed, they audibly ease off while the rotor speed stays up.
- More power: the turbines audibly dig in, the rotor speed stays the same
- Less power: the sound falls back just as clearly, the rotor speed stays up
- Climb, hover, descent: every load state sounds different, because the turbines have a different amount of work to do
- Turbine sound across every phase of flight: cold start, spool-up, idle, flight, shutdown
From the outside: the Fenestron and two turbines
The Fenestron, the shrouded tail rotor of the EC135, is what makes it recognizable. That exact sound is brought out in the exterior mix, not just carried along.
- The unmistakable tone of the Fenestron on a flyby and in the hover
- The characteristic twin-turbine whine
- Rotor downwash, flyby and hover fully reworked
- Dedicated sound files for every exterior view
VR compatible
The sound works no matter which view you fly in: in the cockpit, in the exterior view and with a VR headset on.
Reviewed by SimFlight, Threshold and MSFS Addons.
What it cannot do
- It affects the EC135 only, every other helicopter stays untouched
- It changes nothing about flight behavior and nothing about the visuals
- It produces no vibration, that is what the FWX Rotor Blade Haptic is for
Works with your other add-ons
- Compatible with ChasePlane and FSRealistic
- No impact on frame rate
- Works alongside the FWX Rotor Blade Haptic without hindering it
Installation and uninstallation
- Click-through installer, pick the folder, done
- You can uninstall in two ways: through our own FWX application or through the Windows program list
- Uninstalling restores the stock sounds
Note: package order in the package library
It can happen that the package order has to be set by hand for the sound to take effect. This refers to the settings in the simulator under the package library. The installer walks you through it with a confirmation dialog. If you set it by hand, do this once:
- Open General Options, Advanced Options, Package Order Tool
- Enable the tool and clear the "Scenery packages only" checkbox
- Search for "135"
- Move the FWX Sound Pack below the Nemeth Design EC135
- Restart the simulator
Updates
Free updates, new sound content at no extra charge.
Also available as a bundle
- FWX HELI FLIGHT DYNAMICS & ROTOR EFFECTS
- FWX HELICOPTER ALL-IN-ONE BUNDLE MSFS24
More information: finnwestx1. com
Exclusive Discord discounts
Get exclusive partner discounts when you join our Discord. Find the codes in #💵discounts.
Join our DiscordKodiak 100
The most popular STOL plane in Microsoft Flight Simulator, now ready for FS2024! Whether operating in the remote airstrips of Papua-New Guinea or busy international airports, the power and agility of the Kodiak 100 will get you in and out of anywhere!
This high-wing, single-engine turboprop aircraft can transporting up to 9 passengers or cargo up to a distance of 1,132nm. Equipped with the Pratt & Whitney Canada PT6A-34 engine flat-rated at 750shp, the aircraft is capable of taking off an... The most popular STOL plane in Microsoft Flight Simulator, now ready for FS2024! Whether operating in the remote airstrips of Papua-New Guinea or busy international airports, the power and agility of the Kodiak 100 will get you in and out of anywhere!
This high-wing, single-engine turboprop aircraft can transporting up to 9 passengers or cargo up to a distance of 1,132nm. Equipped with the Pratt & Whitney Canada PT6A-34 engine flat-rated at 750shp, the aircraft is capable of taking off and landing in less than 350ft, enabling it to operate from small, unprepared airstrips all over the world!
With 5 exterior variants and 5 cabin configurations, authentic sounds, detailed visual, flight and systems modelling, the SWS Kodiak 100 is one of the most popular planes in Microsoft Flight Simulator! Whether operating in the remote airstrips of Papua-New Guinea or busy international airports, the power and agility of the Kodiak 100 will get you in and out of anywhere!
DESCRIPTION
The Kodiak 100 Series is a high-wing, single-engine turboprop aircraft, capable of transporting up to 9 passengers or cargo up to a distance of 1,132nm. Equipped with the Pratt & Whitney Canada PT6A-34 engine flat-rated at 750shp, the aircraft is capable of taking off and landing in less than 350ft, enabling it to operate from small, unprepared airstrips all over the world!
With 5 exterior variants and 5 cabin configurations, authentic sounds, detailed visual, flight and systems modelling, the SWS Kodiak 100 is one of the most popular planes in Microsoft Flight Simulator! Whether operating in the remote airstrips of Papua-New Guinea or busy international airports, the power and agility of the Kodiak 100 will get you in and out of anywhere!
Created with the help of Daher and real Kodiak pilots, the SWS Kodiak comes in three different airframe variants and two tyre configurations, more than 30 different liveries, authentic flight dynamics and high quality systems modelling!
- Accurate interior and exterior 3D model created from factory CAD data and hundreds of reference pictures
- Three base airframe variants included: base airframe, cargo pod and amphibian variant.
- Pick the right tyre for the job! Wheeled variants can be equipped with either standard or the larger tundra tyres, suitable for rough airstrips.
- Five different interiors: cargo, passenger, mixed, summit (executive), skydive (wheeled variants only)
- 30+ liveries included: from custom liveries to factory paintjobs, the SWS Kodiak has plenty to choose from!
- Custom animations: landing gear flex, tail fluttering, working cabin lighting, armrests, air conditioning nozzles and much more!
- Custom G1000 NXi integration: built to reflect the real aircraft, the FS2024 Kodiak 100 features authentic layouts, multiple custom screens, full checklists, reversionary mode and individual systems sensors connected to their respective circuits.
- Custom ESI500 Standby Instrument with synthetic vision and independent navigation capability
- FS2024-native preflight features: remove covers, inspect the engine oil, check your brakes and tyres like you would on the real aircraft!
- Custom engine simulation featuring correct ITT and fuel governing, ITT limiting and engine damage from limit excursions!
- Accessibility: a smart auto-start/auto-stop system allows casual users to start the aircraft using the flight simulator shortcuts without damaging the engine!
- Custom air conditioning system with authentic screen, individual AC nozzle effects, heat transfer simulation across zones and insulation losses!
- Detailed electrical system with working circuit breakers
- High quality sounds recorded from the real aircraft
Developers Only-21-3d Logos-airliners
Hello dear fellows developers.
Theres a Little collection of 21 3D logos from some famous Airliners in HD.
AMERICAN
UNITED
JETBLUE
SPIRIT
DELTA
COPA
SOUTHWEST
AVIANCA
BRITISH AIRWAYS
AIR FRANCE
KLM
EMIRATES
ALASKA
AIR CANADA
LUFTHANSA
SWISS
LATAM
AEROMEXICO
IBERIA
JAPAN
QUANTAS
For installation, just put the 21 logo and the texture fol... Hello dear fellows developers.
Theres a Little collection of 21 3D logos from some famous Airliners in HD.
AMERICAN
UNITED
JETBLUE
SPIRIT
DELTA
COPA
SOUTHWEST
AVIANCA
BRITISH AIRWAYS
AIR FRANCE
KLM
EMIRATES
ALASKA
AIR CANADA
LUFTHANSA
SWISS
LATAM
AEROMEXICO
IBERIA
JAPAN
QUANTAS
For installation, just put the 21 logo and the texture folder; inside youre “modelLib” folder in your Project and activate when you save the first time with you´re PROJECT EDITOR.
For use, just find in the scenery library with the LOGO Word as PREFIX
TBPB Barbados
For MSFS2020 and MSFS2024.
Fantastic performance.
Fluid usage, even with complex airliner cockpits and high density AI coverage.
Utilizes imaginesim’s bespoke Operations Center configuration GUI.
Comprehensive ground and building optimization.
Stunning night lighting and effects.
Trees, plants and vegetation modelled with native foliage types.
Enhanced custom made hand-placed surrounding autogen.
Graduated ground extremities to seamlessly blend with any vect... For MSFS2020 and MSFS2024.
Fantastic performance.
Fluid usage, even with complex airliner cockpits and high density AI coverage.
Utilizes imaginesim’s bespoke Operations Center configuration GUI.
Comprehensive ground and building optimization.
Stunning night lighting and effects.
Trees, plants and vegetation modelled with native foliage types.
Enhanced custom made hand-placed surrounding autogen.
Graduated ground extremities to seamlessly blend with any vector driven add-on.
Low simulator impact.
10 square kilometer coverage of the airport area.
Tested and approved by real-life airline pilots.
RKSI/ICN- Incheon International Airport
Incheon International Airport (ICAO: RKSI / IATA: ICN) is South Korea’s main international gateway, located on Yeongjong Island about 30–40 NM west of Seoul. Sitting at just 23 ft elevation, it features four long parallel runways — including the 4,000 m (13,123 ft) 16L/34R — making it ideal for heavy long-haul operations. The airport boasts two massive terminals (Terminal 1 mainly serving Korean Air, Terminal 2 serving Asiana and Star Alliance carriers) with a total of 111 gates and supports hea... Incheon International Airport (ICAO: RKSI / IATA: ICN) is South Korea’s main international gateway, located on Yeongjong Island about 30–40 NM west of Seoul. Sitting at just 23 ft elevation, it features four long parallel runways — including the 4,000 m (13,123 ft) 16L/34R — making it ideal for heavy long-haul operations. The airport boasts two massive terminals (Terminal 1 mainly serving Korean Air, Terminal 2 serving Asiana and Star Alliance carriers) with a total of 111 gates and supports heavy widebody traffic including A380s, 777s, 787s, and A350s. Known for its efficiency and modern design, Incheon is one of the world’s busiest and highest-rated hubs, offering realistic long taxi times, distinctive Korean signage, and impressive night lighting that flight simmers will appreciate.
Experience South Korea’s premier aviation gateway like never before! SiamFlight RKSI Incheon International Airport is a community-driven passion project created in close partnership with the dedicated South Korean flight simulation community. This scenery has been shaped by local simmers, real-world references, and countless hours of feedback from Korean pilots and enthusiasts who know the airport inside out.
Benin City Airport DNBE
Experience the heart of Edo State with a lightweight yet detailed rendition of Benin Airport — focused on accuracy, performance, and essential realism for everyday flying.
Benin Airport (IATA: BNI, ICAO: DNBE) is an airport serving Benin City, the capital of Edo State in Nigeria. The runway is in the middle of the city.
Benin City Airport was built in the 1970s as a small airfield to serve the local community. Over the years, it has undergone several upgrades and expansions to be... Experience the heart of Edo State with a lightweight yet detailed rendition of Benin Airport — focused on accuracy, performance, and essential realism for everyday flying.
Benin Airport (IATA: BNI, ICAO: DNBE) is an airport serving Benin City, the capital of Edo State in Nigeria. The runway is in the middle of the city.
Benin City Airport was built in the 1970s as a small airfield to serve the local community. Over the years, it has undergone several upgrades and expansions to become a modern airport, with a new terminal building and improved facilities. In 2007, the airport was renovated and expanded to accommodate larger aircraft and increase passenger capacity.
Feature list:
- Custom Handcrafted PBR Models
- Detailed terminal with lightweight interior
- Accurate ground layout
- Accurate runway slope
- GSE clutters
- Custom background imagery
- MSFS 2020 and 2024 support
RJFC Yakushima Airport
New airport for MSFS2020
RJFC Yakushima - Located on one of the most beautiful islands in Japan.
In this development, an attempt has been made to externally recreate the entire airport plus some nearby buildings.
Yakushima Airport is located on Yakushima Island, in Yakushima City, Kumage District, Kagoshima Prefecture, Japan. The airport opened in 1963 with a 1,100 meter runway. The track was extended to 1,200 meters in 1975, and 1,500 meters in 1976.New airport for MSFS2020
RJFC Yakushima - Located on one of the most beautiful islands in Japan.
In this development, an attempt has been made to externally recreate the entire airport plus some nearby buildings.
Yakushima Airport is located on Yakushima Island, in Yakushima City, Kumage District, Kagoshima Prefecture, Japan. The airport opened in 1963 with a 1,100 meter runway. The track was extended to 1,200 meters in 1975, and 1,500 meters in 1976.
EDDC - Dresden Airport On Sale
Touch down in the heart of Saxony!
Dresden Airport (IATA: DRS, ICAO: EDDC) is located about 9 km north of Dresden’s historic city center. The airport features a unique terminal built inside a former aircraft assembly hall, giving it one of the most distinctive airport architectures in Germany. With a 2,850-meter runway and modern infrastructure, the airport accommodates passenger flights, cargo operations, and large maintenance facilities, making it an important aviation gateway for eastern G... Touch down in the heart of Saxony!
Dresden Airport (IATA: DRS, ICAO: EDDC) is located about 9 km north of Dresden’s historic city center. The airport features a unique terminal built inside a former aircraft assembly hall, giving it one of the most distinctive airport architectures in Germany. With a 2,850-meter runway and modern infrastructure, the airport accommodates passenger flights, cargo operations, and large maintenance facilities, making it an important aviation gateway for eastern Germany.
- Handcrafted airport and landside area with up-to-date airport layout
- Fully modeled realistic terminal interior, including the underground railway station
- Accurate apron layout, markings, stands, and parking positions
- Custom animated ground vehicles
- Highly accurate terrain with realistic runway slope
- Detailed Elbe Flugzeugwerke hangar (Halle 230) interior
- Detailed IABG hangar interior
- Realistic ground textures with wear, rubber marks, and weathering
- Fully functional custom jetways
- High-quality PBR textures
- Detailed control tower with interior
- Custom satellite imagery for the entire airport area
- Seamless integration with MSFS photogrammetry for the surrounding city
- Detailed fire station and additional technical buildings
- Realistic night lighting environment
- Custom GSX profile included
Note: If you experience any issues with photogrammetry, make sure you have City Update 12: Germany installed - available for free on the marketplace.
EDDS - Stuttgart Airport
Discover one of southern Germany’s most important aviation hubs in stunning detail. This highly immersive recreation of Stuttgart Airport (EDDS/STR) is the next leap in cutting-edge visuals, accurate infrastructure, and a vibrant atmosphere built exclusively for Microsoft Flight Simulator 2024 using all of its advantages.
From the iconic terminal complex to the busy apron areas, every element of the airport has been carefully crafted to deliver a true-to-life flying experience. Pilots can en... Discover one of southern Germany’s most important aviation hubs in stunning detail. This highly immersive recreation of Stuttgart Airport (EDDS/STR) is the next leap in cutting-edge visuals, accurate infrastructure, and a vibrant atmosphere built exclusively for Microsoft Flight Simulator 2024 using all of its advantages.
From the iconic terminal complex to the busy apron areas, every element of the airport has been carefully crafted to deliver a true-to-life flying experience. Pilots can enjoy realistic terrain profiles, high-resolution textures, and dynamic lighting that transforms the airport into a breathtaking environment at both day and night.
Beyond the airport itself, carefully modeled surroundings and recognizable landmarks – including the nearby Altbach/Deizisau Power Plant – create even more immersion during approaches and departures.
Designed from the ground up using the latest MSFS 2024 SDK technology, this scenery offers a living airport environment filled with animated interiors, moving vehicles, and rich visual detail.
- Includes a highly accurate recreation of Stuttgart Airport (EDDS/STR)
- Accurate models of airport buildings and facilities
- Up to date airport layout (As of March 2026)
- Custom terrain elevation mesh and runway profiles
- High resolution and realistic building textures
- Highly realistic night time effects
- Custom aerial image covering the airport boundary and close vicinity
- Custom taxiway signage models
- Accurate taxiway lighting including custom models for the light fixtures
- Custom approach light models and effects
- Stands support AI traffic with airline parking codes
- Custom jetway models
- Supports the Aerosoft VDGS and GSX VDGS
- Includes custom GSX profiles with accurate procedures
- Includes landmarks such as the Stuttgarter Fernsehturm
- Landmarks have accurate night lighting
- Custom visual effects for the power plant Altbach/Deizisau
- Developed exclusively for MSFS 2024 using all new SDK features
- Dynamic and living airport environment with:
- Accurate interior modeling
- Large parts of the interior is walkable in avatar mode (enter through the jetways or landside entrance)
- Interior animated passenger models
- Beautifully designed visitor terrace, including exhibition
- Various animations such as proximity triggered doors, elevators etc.
- Custom vehicle traffic on the apron area
New Orleans, Louisiana
This pack brings New Orleans to life with over 100 handcrafted buildings, detailed landmarks, enhanced textures and night lighting, and water and tree cleanup to showcase the unique charm of the Big Easy.
100+ handcrafted city buildings
Enhanced Mississippi River waterfront and skyline
Manual tree and water cleanup across the city for a cleaner, more realistic look
Immersive, true-to-life night lighting and signage
High quality PBR textures
Performance-optimized models... This pack brings New Orleans to life with over 100 handcrafted buildings, detailed landmarks, enhanced textures and night lighting, and water and tree cleanup to showcase the unique charm of the Big Easy.
100+ handcrafted city buildings
Enhanced Mississippi River waterfront and skyline
Manual tree and water cleanup across the city for a cleaner, more realistic look
Immersive, true-to-life night lighting and signage
High quality PBR textures
Performance-optimized models for smooth frame rates
Exclusive Discord discounts
Get exclusive partner discounts when you join our Discord. Find the codes in #💵discounts.
Join our Discord